ivtv: version 0.8.0 (tagged release) loading
ivtv: Linux version: 2.6.18.1 SMP mod_unload gcc-3.4
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: Encoder revision: 0x02050032
ivtv0: Registered device video1 for encoder MPEG
ivtv0: Registered device video32 for encoder YUV
ivtv0: Registered device vbi0 for encoder VBI
ivtv0: Registered device video24 for encoder PCM audio
ivtv0: Registered device radio0 for encoder radio
ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
ivtv: ==================== END INIT IVTV ====================
I finally got my firmware working right, and I was able to obtain video from TV Channels, but I haven't yet been able to get any signal from my S-Video input. How can I select it? I tried using ivtv-tune, ivtvctl, v4l2-ctl. What options should I use?
Thanks
Cheap Talk? Check out Yahoo! Messenger's low PC-to-Phone call rates.
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
