n 11/15/06, mike kennedy <[EMAIL PROTECTED]> wrote: > I there first time posting on this list, that you for all your help! > > I have a Mandriva 2006 install with the upgraded kernel to 2.6.17. > And I cannot seem to get the firmware loaded. here is the output from ivtv. > In the /etc/modules.conf I guessed the tuner of 55?? I am not sure. > Is this a good guess for this card?? It seems to have found it. > > Linux video capture interface: v1.00 > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.7.0 (tagged release) loading > ivtv: Linux version: 2.6.17-1mdk mod_unload 686 gcc-4.0 > ivtv: In case of problems please include the debug info between > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > ivtv: any module options, when mailing the ivtv-users mailinglist. > ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) > ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 18 > tveeprom 0-0050: Hauppauge model 26032, rev C199, serial# 8328515 > tveeprom 0-0050: tuner model is TCL 2002N 5H (idx 99, type 50) > tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) > tveeprom 0-0050: audio processor is CX25841 (idx 35) > tveeprom 0-0050: decoder processor is CX25841 (idx 28) > tveeprom 0-0050: has no radio, has IR remote > usb 5-1.1: device not accepting address 3, error -71 > tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) > cx25840 0-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0) > cx25840 0-0044: unable to open firmware v4l-cx25840.fw > wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) > hub 5-1:1.0: Cannot enable port 1. Maybe the USB cable is bad? > ivtv0: unable to open firmware v4l-cx2341x-enc.fw > ivtv0: did you put the firmware in the hotplug firmware directory? > ivtv0 warning: failed loading encoder firmware > ivtv0 warning: Error loading firmware -3! > ivtv0: Error -3 initializing firmware. > ivtv0: Error -12 on initialization > ivtv: probe of 0000:00:0c.0 failed with error -12 > ivtv: ==================== END INIT IVTV ==================== > Linux agpgart interface v0.101 (c) Dave Jones > agpgart: Detected AGP bridge 0 > agpgart: AGP aperture is 64M @ 0xf8000000 > > > > Which directory do I copy the firmware too? I cannot find it. > Thanks for all you help! > > Mike
Usually it is supposed to go into /lib/firmware but this is different between distros's. Greets Sander _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
