> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Sam > Varshavchik > Sent: Sunday, November 19, 2006 2:08 PM > To: User discussion about IVTV > Subject: Re: [ivtv-users] lirc_i2c: no version for > "lirc_unregister_plugin" found > > David Fishburn writes: > > > sudo modprobe lirc_i2c > > dmesg | tail > > > > I get this output: > > [ 44.670400] lirc_dev: IR Remote Control driver > registered, at major 61 > > [ 44.681445] lirc_i2c: no version for > "lirc_unregister_plugin" found: > > kernel tainted. > > This is a known issue, but does not have anything to do with > your other problems. > > Earlier this year I sent a quick fix to the makefile to stop > it from tainting the kernel. It was so long ago that I > forgot if it was lirc's makefile or ivtv's makefile that > needed to be fixed. It was a no-brainer fix, but nobody cared.
Hmm, will that address the no version for "lirc_unregister_plugin" found error? I did a search on your username and did not find any references to this. I also check the lirc open source page: http://sourceforge.net/forum/forum.php?forum_id=16771 Any suggestions on where I might find the fix you posted? > > > Instead of this output: > > On a Hauppauge 150, the output looks like this: > > > > lirc_i2c: chip found @ 0x71 (Hauppauge IR (PVR150)) > > ivtv0: i2c attach to card #0 ok [client=Hauppauge IR (PVR150), > > addr=71] > > lirc_dev: lirc_register_plugin: sample_rate: 10 > > The 150 does not have an IR receiver, AFAIK. I am using the pvr-500, the messages above were just examples of the kind of response I was expecting. The pvr-500 I have is the MCE version, so those come with a remote plus an IR receiver and an IR blaster. Dave _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
