Mike Millner wrote: > > First..sorry for sending to both the developers list and the users list, > however the output says to send parts of the output to the dev list so I > thought I would kill 2 birds with one stone. Also I thought I might get some > good input from users on each list.
Removed ivtv-devel. > > I have Hauppauge WinTV-PVR-150. I running suse 10.1 with > 2.6.16.21-0.25-debug kernel. I have copied the firmware into /lib/firmware > and installed a bunch of packages to try to get kaffeine to play the tv. It > looks to me, from the output below of the boot.msg file) that suse sees the > card but can't figure out the model with certainty. The firmware location is good. > > First question..is the hardware ok or do I need to do something else? Cant say for sure but i looks ok from the ivtv init. See below about the ivtv version. > > Second.what software are people using for players? And how do you get it to > see your channels? I live in Denver, CO USA and have standard, non digital, > cable tv mplayer for testing and my box runs mythtv. For me I add the frequencies in mythtv by hand with mythweb. Open the device directly: mplayer /dev/video0 > When I try to start Kaffeine it complains about "no DVB compatible devices". The pvr-x50 are not DVB devices. > > I followed some instructions I found at > http://www.acaciaclose.co.uk/16226/index.html One of the steps was to > install a dvb package using YAST, which I did without errors. Don't follow this as it is not for the pvr cards. > I'm not really sure what else to try from here. Any suggestions would be > appreciated. > > > > Thanks, > > Mike > > > suse:/home/mike # grep ivtv /var/log/boot.msg > > <4>ivtv: module not supported by Novell, setting U taint flag. > > <6>ivtv: ==================== START INIT IVTV ==================== > > <6>ivtv: version 0.7.0 (development snapshot compiled on Tue Jul 18 > 02:37:25 2006) loading > > <6>ivtv: Linux version: 2.6.16.21-0.13-debug SMP 586 REGPARM gcc-4.1 OK here is a problem. ivtv 0.7.x is only for 2.6.17 kernels and can not be used with 2.6.16. Use ivtv 0.6.x instead. I suspect many of the issues will be solved when using ivtv 0.6.x. If not post the exact error and the ivtv init message Greets Sander _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
