Hi everybody, I just upgraded from 2.6.17.13 kernel to 2.6.19 and upgraded by ivtv as well. However, just yesterday i was getting sound with video but not anymore after the upgrade. Any ideas why I am not getting any sound with the video? I also read and followed the README that came with ivtv-0.9.0 source that has info about kernel configuration.
Here's the info after the upgrade: ivtv version 0.9.0 kernel version 2.6.19 mythtv version 0.20 lirc version 0.8.1pre3 lsmod Module Size Used by snd_seq_dummy 2820 0 snd_seq_oss 26368 0 snd_seq_midi_event 5504 1 snd_seq_oss snd_seq 38864 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_seq_device 6028 3 snd_seq_dummy,snd_seq_oss,snd_seq snd_pcm_oss 36640 0 snd_mixer_oss 13440 1 snd_pcm_oss ipv6 199040 18 jfs 145348 1 loop 12168 0 ivtv_fb 26212 1 msp3400 26912 0 w83627ehf 16012 0 i2c_isa 3840 1 w83627ehf lirc_serial 11104 0 cx8800 26380 0 cx88xx 55716 1 cx8800 ir_common 25476 1 cx88xx video_buf 18308 2 cx8800,cx88xx compat_ioctl32 1280 1 cx8800 btcx_risc 3976 2 cx8800,cx88xx lirc_i2c 7428 2 lirc_dev 11220 2 lirc_serial,lirc_i2c cpufreq_conservative 5536 0 cpufreq_ondemand 5888 0 cpufreq_performance 1920 0 cpufreq_powersave 1664 1 cpufreq_stats 4356 0 video 14468 0 thermal 11528 0 button 5264 0 fan 3716 0 powernow_k8 11788 0 freq_table 3588 3 cpufreq_ondemand,cpufreq_stats,powernow_k8 processor 21420 2 thermal,powernow_k8 usb_storage 31108 0 uhci_hcd 18444 0 lp 7876 0 saa7127 10132 0 saa7115 14224 0 tuner 55592 0 ide_cd 32900 0 nvidia 4706132 0 snd_intel8x0 26396 0 snd_ac97_codec 83360 1 snd_intel8x0 snd_ac97_bus 2048 1 snd_ac97_codec snd_pcm 60936 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec ivtv 155280 2 ivtv_fb firmware_class 7168 1 ivtv i2c_algo_bit 6920 2 cx88xx,ivtv cx2341x 9732 1 ivtv tveeprom 12816 2 cx88xx,ivtv snd_timer 16900 2 snd_seq,snd_pcm snd 38884 9 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer soundcore 5728 1 snd ehci_hcd 23304 0 k8temp 4352 0 ohci_hcd 16260 0 agpgart 25392 1 nvidia evdev 7552 0 i2c_nforce2 5760 0 i2c_core 15760 13 msp3400,w83627ehf,i2c_isa,cx88xx,lirc_i2c,saa7127,saa7115,tuner,nvidia,ivtv,i2c_algo_bit,tveeprom,i2c_nforce2 snd_page_alloc 7304 2 snd_intel8x0,snd_pcm videodev 21760 3 cx8800,cx88xx,ivtv v4l1_compat 11652 3 cx8800,ivtv,videodev v4l2_common 20224 7 msp3400,cx8800,saa7115,tuner,ivtv,cx2341x,videodev hwmon 2324 2 w83627ehf,k8temp 8250_pnp 8960 0 8250 17508 1 8250_pnp serial_core 14976 1 8250 cdrom 33184 1 ide_cd 8139too 19456 0 serio_raw 5124 0 parport_pc 20548 1 parport 18240 2 lp,parport_pc unix 18992 98 sata_nv 7556 0 libata 83348 1 sata_nv sd_mod 14096 0 sg 25244 0 scsi_mod 72200 4 usb_storage,libata,sd_mod,sg v4l2-ctl -I --verbose VIDIOC_QUERYCAP: ok VIDIOC_G_INPUT: ok Video input : 1 (S-Video 1) v4l2-ctl --log-status Status Log: ivtv0: ================= START STATUS CARD #0 ================= tveeprom 2-0050: Hauppauge model 48132, rev K268, serial# 8551133 tveeprom 2-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 2-0050: audio processor is MSP4448 (idx 27) tveeprom 2-0050: decoder processor is SAA7115 (idx 19) tveeprom 2-0050: has radio, has IR remote tda9887 2-0043: Data bytes: b=0xd4 c=0x30 e=0x44 tuner 2-0061: Tuner mode: analog TV tuner 2-0061: Frequency: 67.25 MHz tuner 2-0061: Standard: 0x0000b000 saa7115 2-0021: Audio frequency: 48000 Hz saa7115 2-0021: Input: S-Video 0 saa7115 2-0021: Video signal: broadcast/DVD saa7115 2-0021: Frequency: 60 Hz saa7115 2-0021: Detected format: NTSC saa7115 2-0021: Width, Height: 720, 480 saa7127 2-0044: Standard: 60 Hz saa7127 2-0044: Input: normal saa7127 2-0044: Output: S-Video + Composite saa7127 2-0044: WSS: disabled saa7127 2-0044: VPS: disabled saa7127 2-0044: CC: disabled msp3400 2-0040: MSP4448G-B3 rev1 = 0x0217 rev2 = 0x3043 msp3400 2-0040: Audio: volume 58950 msp3400 2-0040: Mode: External input msp3400 2-0040: Audmode: 0x0001 msp3400 2-0040: Routing: 0x00222220 (input) 0x00000044 (output) msp3400 2-0040: ACB: 0x0c00 ivtv0: Video Input: S-Video 1 ivtv0: Audio Input: Line In 1 ivtv0: Video Output: S-Video + Composite ivtv0: Audio Output: A/V Audio Out ivtv0: Passthrough: off ivtv0: Tuner: TV ivtv0: Stream: MPEG-2 Program Stream ivtv0: VBI Format: No VBI ivtv0: Video: 720x480, 30 fps ivtv0: Video: MPEG-2, 4x3, Variable Bitrate, 1800000, Peak 2200000 ivtv0: Video: GOP Size 15, 2 B-Frames, GOP Closure, No 3:2 Pulldown ivtv0: Audio: 48 kHz, Layer II, 224 kbps, Stereo, No Emphasis, No CRC ivtv0: Spatial Filter: Manual, Luma 1D Horizontal, Chroma 1D Horizontal, 0 ivtv0: Temporal Filter: Manual, 8 ivtv0: Median Filter: Off, Luma [0, 255], Chroma [0, 255] ivtv0: ================== END STATUS CARD #0 ================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
