Has anyone gotten this card to be reconized by the IVTV firmware:
Here is some info:
It looks like the card loads, i can change to NTSC and channel 0. When
doing cat /dev/video > test.mpg i get no output. It does seem to be a
valid mpg file though. The ivtv version I am running is ivtv0.4-0.4.6.
I am using no module options. I am running devfs.
[17181805.216000] ivtv: ==================== START INIT IVTV
====================
[17181805.216000] ivtv: version 0.4.6 (tagged release) loading
[17181805.216000] ivtv: Linux version: 2.6.15-27-k7 SMP preempt K7
gcc-4.0
[17181805.216000] ivtv: In case of problems please include the debug
info between
[17181805.216000] ivtv: the START INIT IVTV and END INIT IVTV lines,
along with[17181805.216000] ivtv: any module options, when mailing the
ivtv-users mailinglist.
[17181805.216000] ivtv0: Unknown card: vendor/device: 4444/0016
[17181805.216000] ivtv0: subsystem vendor/device:
104d/813d
[17181805.216000] ivtv0: cx23416 based
[17181805.216000] ivtv0: Defaulting to WinTV PVR 150 card
[17181805.216000] ivtv0: Please mail the vendor/device and subsystem
vendor/device IDs and what kind of
[17181805.216000] ivtv0: card you have to the ivtv-devel mailinglist
(www.ivtvdriver.org)
[17181805.216000] ivtv0: Prefix your subject line with [UNKNOWN CARD].
[17181805.216000] ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKB] ->
GSI 17 (level, low) -> IRQ 217
[17181805.264000] tveeprom: Encountered bad packet header [aa]. Corrupt
or not a Hauppauge eeprom.
[17181805.264000] ivtv0: i2c attach to card #0 ok [client=tveeprom,
addr=50]
[17181805.284000] ivtv0: No tuner detected, default to NTSC
[17181805.292000] tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c
driver #0
[17181805.292000] All bytes are equal. It is not a TEA5767
[17181805.292000] ivtv0: i2c attach to card #0 ok [client=(tuner unset),
addr=60]
[17181805.488000] ivtv0 warning: i2c client addr: 0x44 not found for
command 0xc008561c!
[17181806.224000] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144
bytes)
[17181806.440000] ivtv0: Encoder revision: 0x02050032
[17181806.444000] ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768
buffers (4096KB total)
[17181806.444000] ivtv0: Allocate DMA encoder YUV stream: 194 x 10800
buffers (2048KB total)
[17181806.444000] ivtv0: Allocate DMA encoder VBI stream: 120 x 17472
buffers (2048KB total)
[17181806.444000] ivtv0: Allocate DMA encoder PCM audio stream: 455 x
4608 buffers (2048KB total)
[17181806.448000] tuner: type set to 4 (NoTuner) by ivtv i2c driver #0
[17181806.448000] ivtv0 warning: i2c client addr: 0x44 not found for
command 0x40085618!
[17181806.448000] ivtv0 warning: i2c client addr: 0x44 not found for
command 0xc0045627!
[17181806.448000] ivtv0 warning: i2c client addr: 0x1b not found for
command 0x40046d11!
[17181806.448000] ivtv0 warning: i2c client addr: 0x44 not found for
command 0x40046d11!
[17181806.448000] ivtv0 warning: i2c client addr: 0x44 not found for
command 0x40085618!
[17181806.448000] ivtv0 warning: i2c client addr: 0x44 not found for
command 0xc008561c!
[17181806.448000] ivtv0 warning: i2c client addr: 0x1b not found for
command 0x402c5639!
[17181806.448000] ivtv0 warning: i2c client addr: 0x44 not found for
command 0x402c5639!
[17181806.448000] ivtv0 warning: i2c client addr: 0x44 not found for
command 0xc008561c!
[17181806.448000] ivtv0: Initialized WinTV PVR 150, card #0
[17181806.448000] ivtv: ==================== END INIT IVTV
==================
0000:02:07.0 Multimedia video controller: Internext Compression Inc
iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Sony Corporation: Unknown device 813d
Flags: bus master, medium devsel, latency 64, IRQ 217
Memory at d8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
I followed these guides:
http://ivtvdriver.org/index.php/Howto
http://ivtvdriver.org/index.php/Troubleshooting
Also have done extensive google searching and checked on
irc.freenode.net with no luck.
I am running kernel version 2.6.15-27-k7 provided by ubuntu dapper.
I have a via motherboard chipset.
This is the only video capture card I have on my computer.
Please help so I can get this working.
I think this is something as simple as confirming memory addresses or
might need some further development. Has anyone else had any luck on
this card. Even if it is using composite instead of the tuner I would
be happy.
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
