Hi
I'm currently using a 150 and a 350 card for broadcasting with vlc.
It is working file.
Now I have to use real producer too.
But it cannot start due to a failing ioctl:
$ ./producer -da -dt -vc /dev/video0 -vp 0 -cs 320x240 -o test.rm
RealProducer(R) Basic 11.0 Build number: 11.0.0.2013
Error: Could not initialize video capture device (VIDIOCGMBUF)
Error: Unable to initialize input
Error: Failed to initialize inputs
Done Errors: 3 Warnings: 0
Any idea why this ioctl is failing ?
thanks you for your answer
infos on the server:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.8.0 (tagged release) loading
ivtv: Linux version: 2.6.18 SMP mod_unload PENTIUM4 gcc-3.3
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based)
PCI: Enabling device 0000:01:08.0 (0110 -> 0112)
ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 17 (level, low) -> IRQ 177
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
msp3400 1-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0)
msp3400 1-0040: MSP4418G-B3 supports nicam and radio, mode is autodetect and
autoselect
tveeprom 1-0050: Hauppauge model 48139, rev K257, serial# 8318656
tveeprom 1-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38)
tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom
0x74)
tveeprom 1-0050: audio processor is MSP4418 (idx 25)
tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
tveeprom 1-0050: has radio, has IR remote
ivtv0: Encoder revision: 0x02050032
ivtv0: Decoder revision: 0x02020023
ivtv0: Registered device video0 for encoder MPEG
ivtv0: Registered device video32 for encoder YUV
ivtv0: Registered device vbi0 for encoder VBI
ivtv0: Registered device video24 for encoder PCM audio
ivtv0: Registered device radio0 for encoder radio
ivtv0: Registered device video16 for decoder MPEG
ivtv0: Registered device vbi8 for decoder VBI
ivtv0: Registered device vbi16 for decoder VOUT
ivtv0: Registered device video48 for decoder YUV
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
tuner 1-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
ivtv: ====================== NEXT CARD ======================
ivtv1: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
PCI: Enabling device 0000:01:09.0 (0110 -> 0112)
ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 18 (level, low) -> IRQ 169
ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #1)
tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1)
cx25840 2-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #1)
cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1)
tveeprom 2-0050: The eeprom says no radio is present, but the tuner type
tveeprom 2-0050: indicates otherwise. I will assume that radio is present.
tveeprom 2-0050: Hauppauge model 26039, rev C1A5, serial# 8474228
tveeprom 2-0050: tuner model is TCL MPE05-2 (idx 105, type 38)
tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom
0x74)
tveeprom 2-0050: audio processor is CX25842 (idx 36)
tveeprom 2-0050: decoder processor is CX25842 (idx 29)
tveeprom 2-0050: has radio, has IR remote
ivtv1: Encoder revision: 0x02050032
ivtv1: Registered device video1 for encoder MPEG
ivtv1: Registered device video33 for encoder YUV
ivtv1: Registered device vbi1 for encoder VBI
ivtv1: Registered device video25 for encoder PCM audio
ivtv1: Registered device radio1 for encoder radio
tuner 2-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
ivtv1: Initialized Hauppauge WinTV PVR-150, card #1
ivtv: ==================== END INIT IVTV ====================
0000:01:08.0 Multimedia video controller: Internext Compression Inc iTVC15
MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR-350
Flags: bus master, medium devsel, latency 64, IRQ 177
Memory at f4000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
0000:01:09.0 Multimedia video controller: Internext Compression Inc iTVC16
(CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc.: Unknown device 8003
Flags: bus master, medium devsel, latency 64, IRQ 169
Memory at f0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
using a vanilla 2.6.18 / ivtv-0.8.0
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
