Hans,Sorry for the delay but here is one of the shots of my ivtv output.Dec 2
12:57:31 mythtv kernel: ivtv: ==================== START INIT IVTV
====================Dec 2 12:57:31 mythtv kernel: ivtv: version 0.4.7 (tagged
release) loadingDec 2 12:57:31 mythtv kernel: ivtv: Linux version:
2.6.15-chw-2 SMP preempt 586 gcc-3.3Dec 2 12:57:31 mythtv kernel: ivtv: In
case of problems please include the debug info betweenDec 2 12:57:32 mythtv
kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along withDec 2
12:57:32 mythtv kernel: ivtv: any module options, when mailing the ivtv-users
mailinglist.Dec 2 12:57:32 mythtv kernel: ivtv0: Autodetected WinTV PVR 150
card (cx23416 based)Dec 2 12:57:32 mythtv kernel: ACPI: PCI Interrupt
0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10Dec 2 12:57:32
mythtv kernel: tveeprom: ivtv versionDec 2 12:57:32 mythtv kernel: tveeprom:
Hauppauge: model = 26032, rev = C199, serial# = 8296927Dec 2 12:57:32 mythtv
kernel: tveeprom: tuner = TCL 2002N 5H (idx = 99, type = 50)Dec 2 12:57:32
mythtv kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 =
0x00001000)Dec 2 12:57:32 mythtv kernel: tveeprom: audio processor = CX25841
(type = 23)Dec 2 12:57:32 mythtv kernel: tveeprom: decoder processor = CX25841
(type = 1c)Dec 2 12:57:32 mythtv kernel: ivtv0: i2c attach to card #0 ok
[client=tveeprom, addr=50]Dec 2 12:57:32 mythtv kernel: tuner (ivtv): chip
found at addr 0xc2 i2c-bus ivtv i2c driver #0Dec 2 12:57:32 mythtv kernel:
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]Dec 2 12:57:32
mythtv kernel: cx25840 1-0044: ivtv driverDec 2 12:57:32 mythtv kernel:
cx25840 1-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)Dec 2 12:57:32
mythtv kernel: cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264 bytes)Dec
2 12:57:32 mythtv kernel: ivtv0: i2c attach to card #0 ok [client=cx25840,
addr=44]Dec 2 12:57:32 mythtv kernel: wm8775 1-001b: chip found @ 0x36 (ivtv
i2c driver #0)Dec 2 12:57:32 mythtv kernel: ivtv0: i2c attach to card #0 ok
[client=wm8775, addr=1b]Dec 2 12:57:32 mythtv kernel: ivtv0: loaded
v4l-cx2341x-enc.fw firmware (262144 bytes)Dec 2 12:57:32 mythtv kernel: ivtv0:
Encoder revision: 0x02050032Dec 2 12:57:32 mythtv kernel: ivtv0: Allocate DMA
encoder MPEG stream: 128 x 32768 buffers (4096KB total)Dec 2 12:57:32 mythtv
kernel: ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB
total)Dec 2 12:57:33 mythtv kernel: ivtv0: Allocate DMA encoder VBI stream:
120 x 17472 buffers (2048KB total)Dec 2 12:57:33 mythtv kernel: ivtv0:
Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)Dec 2
12:57:33 mythtv kernel: tuner: type set to 50 (TCL 2002N) by ivtv i2c driver
#0Dec 2 12:57:33 mythtv kernel: ivtv0: Initialized WinTV PVR 150, card #0Dec
2 12:57:33 mythtv kernel: ivtv: ====================== NEXT CARD
======================Dec 2 12:57:33 mythtv kernel: ivtv1: Autodetected WinTV
PVR 150 card (cx23416 based)Dec 2 12:57:33 mythtv kernel: PCI: Enabling device
0000:00:0f.0 (0000 -> 0002)Dec 2 12:57:33 mythtv kernel: ACPI: PCI Interrupt
0000:00:0f.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11Dec 2 12:57:33
mythtv kernel: tveeprom: ivtv versionDec 2 12:57:33 mythtv kernel: tveeprom:
Hauppauge: model = 26132, rev = F1B2, serial# = 10061467Dec 2 12:57:33 mythtv
mysqld_safe[3575]: startedDec 2 12:57:33 mythtv kernel: tveeprom: tuner = TCL
M2523_5N_E (idx = 112, type = 50)Dec 2 12:57:33 mythtv mysqld[3578]:
/usr/sbin/mysqld: ready for connections.Dec 2 12:57:33 mythtv kernel:
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)Dec 2 12:57:33
mythtv mysqld[3578]: Version: '4.0.22-log' socket:
'/var/run/mysqld/mysqld.sock' port: 3306 Source distributionDec 2 12:57:33
mythtv kernel: tveeprom: audio processor = CX25841 (type = 23)Dec 2 12:57:33
mythtv kernel: tveeprom: decoder processor = CX25841 (type = 1c)Dec 2 12:57:34
mythtv kernel: ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50]Dec 2
12:57:34 mythtv kernel: tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c
driver #1Dec 2 12:57:34 mythtv kernel: ivtv1: i2c attach to card #1 ok
[client=(tuner unset), addr=61]Dec 2 12:57:34 mythtv kernel: cx25840 2-0044:
ivtv driverDec 2 12:57:34 mythtv kernel: cx25840 2-0044: cx25841-23 found @
0x88 (ivtv i2c driver #1)Dec 2 12:57:34 mythtv kernel: eth0: no IPv6 routers
presentDec 2 12:57:34 mythtv kernel: cx25840 2-0044: loaded v4l-cx25840.fw
firmware (14264 bytes)Dec 2 12:57:35 mythtv kernel: ivtv1: i2c attach to card
#1 ok [client=cx25840, addr=44]Dec 2 12:57:35 mythtv kernel: wm8775 2-001b:
chip found @ 0x36 (ivtv i2c driver #1)Dec 2 12:57:35 mythtv kernel: ivtv1: i2c
attach to card #1 ok [client=wm8775, addr=1b]Dec 2 12:57:35 mythtv kernel:
ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)Dec 2 12:57:35 mythtv
kernel: ivtv1: Encoder revision: 0x02050032Dec 2 12:57:35 mythtv
/etc/mysql/debian-start[3595]: Checking for crashed MySQL tables.Dec 2
12:57:35 mythtv kernel: ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768
buffers (4096KB total)Dec 2 12:57:35 mythtv kernel: ivtv1: Allocate DMA
encoder YUV stream: 194 x 10800 buffers (2048KB total)Dec 2 12:57:35 mythtv
kernel: ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB
total)Dec 2 12:57:35 mythtv kernel: ivtv1: Allocate DMA encoder PCM audio
stream: 455 x 4608 buffers (2048KB total)Dec 2 12:57:36 mythtv kernel: tuner:
type set to 50 (TCL 2002N) by ivtv i2c driver #1Dec 2 12:57:36 mythtv kernel:
ivtv1: Initialized WinTV PVR 150, card #1Dec 2 12:57:36 mythtv kernel: ivtv:
==================== END INIT IVTV ====================The second card is the
new one, I tried swapping PCI slots around to no avail. 0.4.8 was unusable so I
went back to 0.4.7I now have just one card loaded the original one. I will be
away for about a week, but I do watch the email while I am away. Should be
building a new box that I can play around with this card when I return around
16 Dec.Thanks AndyOn Sunday 03 December 2006 20:45, Andy wrote:
> I loaded the ivtv 0.4.8 yesterday trying to get a second pvr 150 to
> work. I noticed similar results regarding usability of the box.
> Audio was choppy and the video stuttered but if I recorded that show
> and played it back separately it was fine as long as another stream
> was not being recorded. Additionally I noticed that I lost usability
> of my remote which is run through the included Hauppauge IR blaster
> for a PVR 150 as soon as the card began capturing video.
>
> I backed out the 0.4.8 and went to 0.4.7 and found that everything
> worked except my new PVR 150.
> I am using kernel 2.6.15 under Knoppmyth R5C7.
> I still do not have the second PVR 150 working it shows it is loading
> but I only get snow when I switch to that card which is using the rf
> input to get it's signal. I know signal is good as it works fine in
> the TV.
>
> The new card shows a 26132 encoder, Rev f1b2. I can include the ivtv
> ouput but I need to get to another box to do that...
I need that to be able to see what might be wrong with this card.
Hans_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
