I've been running mythtv under Archlinux. I had tv out via the PVR-350 decoder; at my last system update (Arch has a rolling release system) my tv out stopped working. I have tried going back to the 8.2 version of ivtv on the ivtv site; have also tried the 9.1 version (Arch currently uses a 9.0 version) I get the same problem with all 3. I do have audio out; but no video.
There is a "client creation failed" message in dmesg; but I don't know where that is coming from or how to fix it. dmesg shows this: Linux version 2.6.19-ARCH ([EMAIL PROTECTED]) (gcc version 4.1.2 20061027 (prerelease)) #1 SMP PREEMPT Tue Dec 12 12:47:42 CET 2006 ............. ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.9.0 (tagged release) loading ivtv: Linux version: 2.6.19-ARCH SMP preempt mod_unload 686 REGPARM ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23415 based) ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 14 PCI: setting IRQ 14 as level-triggered ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNKF] -> GSI 14 (level, low) -> IRQ 14 ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) tveeprom 0-0050: Hauppauge model 48132, rev K168, serial# 8809361 tveeprom 0-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 0-0050: audio processor is MSP4448 (idx 27) tveeprom 0-0050: decoder processor is SAA7115 (idx 19) tveeprom 0-0050: has radio, has IR remote ivtv0: Autodetected Hauppauge WinTV PVR-350 tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) msp3400 0-0040: MSP4448G-B3 found @ 0x80 (ivtv i2c driver #0) msp3400 0-0040: MSP4448G-B3 supports radio, mode is autodetect and autoselect i2c_adapter i2c-0: Client creation failed at 0x44 (-1) ivtv0: Encoder revision: 0x02050032 ivtv0: Decoder revision: 0x02020023 ivtv0: Registered device video0 for encoder MPEG ivtv0: Registered device video32 for encoder YUV ivtv0: Registered device vbi0 for encoder VBI ivtv0: Registered device video24 for encoder PCM audio ivtv0: Registered device radio0 for encoder radio ivtv0: Registered device video16 for decoder MPEG ivtv0: Registered device vbi8 for decoder VBI ivtv0: Registered device vbi16 for decoder VOUT ivtv0: Registered device video48 for decoder YUV ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) tuner 0-0061: type set to 47 (LG NTSC (TAPE series)) ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 3 PCI: setting IRQ 3 as level-triggered ACPI: PCI Interrupt 0000:05:01.0[A] -> Link [LNKG] -> GSI 3 (level, low) -> IRQ 3 spurious 8259A interrupt: IRQ7. ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #1) tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1) i2c_adapter i2c-1: Client creation failed at 0x44 (-1) tveeprom 1-0050: Hauppauge model 26552, rev F168, serial# 9887679 tveeprom 1-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 1-0050: audio processor is CX25843 (idx 37) tveeprom 1-0050: decoder processor is CX25843 (idx 30) tveeprom 1-0050: has radio, has no IR remote ivtv1: Autodetected Hauppauge WinTV PVR-150 cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264 bytes) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1) ivtv1: Encoder revision: 0x02050032 ivtv1: Registered device video1 for encoder MPEG ivtv1: Registered device video33 for encoder YUV ivtv1: Registered device vbi1 for encoder VBI ivtv1: Registered device video25 for encoder PCM audio ivtv1: Registered device radio1 for encoder radio tuner 1-0061: type set to 47 (LG NTSC (TAPE series)) ivtv1: Initialized Hauppauge WinTV PVR-150, card #1 ivtv: ==================== END INIT IVTV ==================== ivtv0-osd: Framebuffer module loaded (attached to ivtv card id 0) ivtv0-osd: screen coords: [0 0] -> [720 480] ivtv0-osd: original global alpha = 208 ivtv0-osd: current OSD state = 39 ivtv0-osd: new global alpha = 208 (1 255 0) ivtv0-osd: framebuffer at 0xd9510000, mapped to 0xf9810000, size 1665k ivtv0-osd: mode is 720x480x32, linelength=2880 ivtv0-osd: fb1: cx23415 TV out frame buffer device ........... _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
