Sorry, I did grep by ivtv, guess that was the wrong way to do it. Here is
the full thing and that line IS there. I'll work on trying to get windows on
this box to test it out.
Thanks,
Josh
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.8.2 (tagged release) loading
ivtv: Linux version: 2.6.18-1.2798.fc6 SMP mod_unload 586 REGPARM 4KSTACKS
gcc-4.1
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
EDAC MC: Ver: 2.0.1 Oct 16 2006
nvidia: module license 'NVIDIA' taints kernel.
eth0: forcedeth.c: subsystem: 0103c:2a3e bound to 0000:00:14.0
ivtv0: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI Interrupt 0000:03:08.0[A] -> Link [APC1] -> GSI 16 (level, low) ->
IRQ 233
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APC7] -> GSI 16 (level, low) ->
IRQ 233
PCI: Setting latency timer of device 0000:00:05.0 to 64
sd 0:0:0:0: Attached scsi generic sg0 type 0
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
tveeprom 2-0050: Hauppauge model 26132, rev G1B2, serial# 9832125
tveeprom 2-0050: tuner model is TCL M2523_5N_E (idx 112, type 50)
tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 2-0050: audio processor is CX25841 (idx 35)
tveeprom 2-0050: decoder processor is CX25841 (idx 28)
tveeprom 2-0050: has no radio, has IR remote
ivtv0: Autodetected Hauppauge WinTV PVR-150
ivtv0: reopen i2c bus for IR-blaster support
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840 2-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: Encoder revision: 0x02050032
ivtv0: Registered device video0 for encoder MPEG
ivtv0: Registered device video32 for encoder YUV
ivtv0: Registered device vbi0 for encoder VBI
ivtv0: Registered device video24 for encoder PCM audio
tuner 2-0061: type set to 50 (TCL 2002N)
ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
ivtv: ==================== END INIT IVTV ====================
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Autodetected Hauppauge WinTV PVR-150
ivtv0: reopen i2c bus for IR-blaster support
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840 2-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)
^^^^^^^^^^^^^^
I'm missing a line like this:
cx25840 8-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
If it is truly missing, then that is the cause of the problem, but it
looks like you grep-ped on 'ivtv' so that could also explain why it is
not in this log.
Otherwise I suggest you put this card in a Windows box and try again. I
get the feeling that the card is broken.
Regards,
Hans
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: Encoder revision: 0x02050032
ivtv0: Registered device video0 for encoder MPEG
ivtv0: Registered device video32 for encoder YUV
ivtv0: Registered device vbi0 for encoder VBI
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
