Hi I have a PVR-150 card on which the audio does not work unless I override the tuner detected to specify tuner type 50. I recently combined it with a PVR-350 in the same PC but I am unsure how to override the tuner for the 150 while leaving it the detected value for the 350.
I would like to do two things: 1) What ever debugging I can to get this card working correctly be default in future versions 2) Figure out the way to load the modules with the correct options so both cards work for the short term As you can see below, the 150 is recognized as: tveeprom 2-0050: tuner model is LG TAPC H791F (idx 82, type 39) On FC3 (with just this card) I simply removed the module and loaded the tuner as type 50. I am running Ubuntu Edgy Eft Any ideas? regards Tim ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.7.0 (tagged release) loading ivtv: Linux version: 2.6.17-10-server SMP mod_unload 686 REGPARM gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 16 (level, low) -> IRQ 193 tveeprom 2-0050: Hauppauge model 26032, rev C182, serial# 2964151 tveeprom 2-0050: tuner model is LG TAPC H791F (idx 82, type 39) tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 2-0050: audio processor is CX25841 (idx 35) tveeprom 2-0050: decoder processor is CX25841 (idx 28) tveeprom 2-0050: has no radio, has IR remote tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) cx25840 2-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0) cx25840 2-0044: unable to open firmware v4l-cx25840.fw wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 2-0061: type set to 39 (LG NTSC (newer TAPC series)) ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ====================== NEXT CARD ====================== [42949638.290000] ivtv1: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based) [42949638.290000] ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 17 (level, low) -> IRQ 177 [42949638.360000] tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1) [42949638.600000] tda9887 3-0043: chip found @ 0x86 (ivtv i2c driver #1) tveeprom 3-0050: Hauppauge model 48132, rev K268, serial# 9868285 tveeprom 3-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 3-0050: audio processor is MSP4448 (idx 27) tveeprom 3-0050: decoder processor is SAA7115 (idx 19) tveeprom 3-0050: has radio, has IR remote saa7115 3-0021: saa7115 found @ 0x42 (ivtv i2c driver #1) saa7127 3-0044: saa7129 found @ 0x88 (ivtv i2c driver #1) msp3400 3-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #1) msp3400 3-0040: MSP4448G-A2 supports radio, mode is autodetect and autoselect ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv1: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv1: Encoder revision: 0x02050032 ivtv1: Decoder revision: 0x02020023 ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv1: Create encoder radio stream ivtv1: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) ivtv1: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) ivtv1: Create decoder VOUT stream ivtv1: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB total) ivtv1: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) tuner 3-0061: type set to 47 (LG NTSC (TAPE series)) ivtv1: Initialized Hauppauge WinTV PVR-350, card #1 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
