[EMAIL PROTECTED] wrote: > -------------- Original message ---------------------- >From: Rudy Zijlstra <[EMAIL PROTECTED]> > > >>[EMAIL PROTECTED] wrote: >> >> >> >>>Having a problem where changing channels with a PVR-150 tuner doesn't >>>actually >>> >>> >>>Everything appears to be initializing without errors: >>> >>>Dec 24 18:14:04 mythtv kernel: ivtv: ==================== START INIT IVTV >>> >>> >>==================== >> >> >>>Dec 24 18:14:10 mythtv kernel: ivtv: ==================== END INIT IVTV >>> >>> >>==================== >> >> >>> >>> >>Hi, >> >>In the above, i am missing the tuner related messages. Can you check >>whether the tuner module is loaded? And check dmesg for any tuner >>related messages? >> >>Thanks, >> >>Rudy >> >>_______________________________________________ >>ivtv-users mailing list >>[email protected] >>http://ivtvdriver.org/mailman/listinfo/ivtv-users >> >> > >'dmesg | grep tuner' yields the following: > >tveeprom: tuner = TCL 2002N 5H (idx = 99, type = 50) >tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) >i2c-core.o: driver i2c TV tuner driver registered. >tuner: chip found @ 0xc2 >ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] >i2c-core.o: client [(tuner unset)] registered to adapter [ivtv i2c driver >#0](pos. 1). > > > > Hmm, i get the feeling you either have an unsupported tuner, or a mismatch somewhere. Keep in mind that on 2.4.33 not all tuners are supported. You might consider going to a 2.6 kernel version. To make sure, please post all between START INIT IVTV and END INIT IVTV (The lines i left above).
Cheers, Rudy _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
