HiUnfortunately my PVR-500 had a very new chipset when I bought it this summer. (tuner=73)I had a working workaround-config before with some workarounds.Suse 10.1 with 2.6.16-kernelivtv 0.6.xSet the tuner to tuner=70,70An another tuner that also was samsung chipset (A wild guess that maked it work for most of the channels)*I saw that in the new release of SuSE 10.2 the 2.6.18-kernel was included with included support for my tuner (73). Installed SuSE 10.2ivtv 0.8.2I was able to change channels and see some, but a lot "flickering" in the picture and sound was interrupted here and there. But some channels worked better than others.I tried ivtv 0.8.1 and 0.8.0. I had problems with all versions, but it felt like it worked little better with lower version.I attached some gavered information.Here are some more logshttp://home.vxu.se/taxsv97/logs.txt Thanks in advanceCheers, TobiasSweden
Hi
Unfortunately my PVR-500 had a very new chipset when I bought it this summer. (tuner=73)
I had a working workaround-config before with some workarounds.
Suse 10.1 with 2.6.16-kernel
ivtv 0.6.x
Set the tuner to tuner=70,70
An another tuner that also was samsung chipset (A wild guess that maked it work for most of the channels)
*I saw that in the new release of SuSE 10.2 the 2.6.18-kernel was included with included support for my tuner (73).
Installed
SuSE 10.2
ivtv 0.8.2
I was able to change channels and see some, but a lot "flickering" in the picture and sound was interrupted here and there. But some channels worked better than others.
I tried ivtv 0.8.1 and 0.8.0. I had problems with all versions, but it felt like it worked little better with lower version.
I attached some gavered information.
Here are some more logs
http://home.vxu.se/taxsv97/logs.txt
Thanks in advance
Cheers, Tobias
Sweden
turtle:~ # dmesg | tac | > sed -n '/=\ \ END INIT IVTV\ \ =/,/= START INIT IVTV =/p; > /= START INIT IVTV =/q' | > tac ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.8.0 (tagged release) loading ivtv: Linux version: 2.6.18.2-34-default SMP mod_unload 586 REGPARM gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) ACPI: PCI Interrupt 0000:04:08.0[A] -> GSI 16 (level, low) -> IRQ 169 usb 5-1: new full speed USB device using uhci_hcd and address 2 usb 5-1: new device found, idVendor=058f, idProduct=9360 usb 5-1: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 5-1: Product: USB Reader usb 5-1: Manufacturer: usb 5-1: SerialNumber: 9205291 usb 5-1: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... usb 3-2.4: new low speed USB device using uhci_hcd and address 3 ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) usb 3-2.4: new device found, idVendor=046d, idProduct=c505 usb 3-2.4: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2.4: Product: USB Receiver usb 3-2.4: Manufacturer: Logitech usb 3-2.4: configuration #1 chosen from 1 choice ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800000cc134] scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver hiddev input: Logitech USB Receiver as /class/input/input2 input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2.4 tveeprom 1-0050: Hauppauge model 23559, rev D596, serial# 9822634 tveeprom 1-0050: tuner model is Samsung TCPG 6121P30A (idx 96, type 73) tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 1-0050: audio processor is CX25843 (idx 37) tveeprom 1-0050: decoder processor is CX25843 (idx 30) tveeprom 1-0050: has radio, has no IR remote ivtv0: This is the first unit of a PVR500 input: Logitech USB Receiver as /class/input/input3 input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2.4 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 1-0060: TEA5767 detected. tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0) tuner 1-0060: type set to 62 (Philips TEA5767HN FM Radio) tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) Vendor: Generic Model: USB SD Reader Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 00 sd 2:0:0:0: Attached scsi removable disk sdb sd 2:0:0:0: Attached scsi generic sg1 type 0 Vendor: Generic Model: USB CF Reader Rev: 1.01 Type: Direct-Access ANSI SCSI revision: 00 sd 2:0:0:1: Attached scsi removable disk sdc sd 2:0:0:1: Attached scsi generic sg2 type 0 Vendor: Generic Model: USB SM Reader Rev: 1.02 Type: Direct-Access ANSI SCSI revision: 00 sd 2:0:0:2: Attached scsi removable disk sdd sd 2:0:0:2: Attached scsi generic sg3 type 0 Vendor: Generic Model: USB MS Reader Rev: 1.03 Type: Direct-Access ANSI SCSI revision: 00 sd 2:0:0:3: Attached scsi removable disk sde sd 2:0:0:3: Attached scsi generic sg4 type 0 usb-storage: device scan complete cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: Encoder revision: 0x02050032 ivtv0: Registered device video0 for encoder MPEG ivtv0: Registered device video32 for encoder YUV ivtv0: Registered device vbi0 for encoder VBI ivtv0: Registered device video24 for encoder PCM audio ivtv0: Registered device radio0 for encoder radio tuner 1-0061: type set to 73 (Samsung TCPG 6121P30A) ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) ACPI: PCI Interrupt 0000:04:09.0[A] -> GSI 17 (level, low) -> IRQ 50 ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #1) tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1) cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1) tveeprom 2-0050: Hauppauge model 23559, rev D596, serial# 9822634 tveeprom 2-0050: tuner model is Samsung TCPG 6121P30A (idx 96, type 73) tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 2-0050: audio processor is CX25843 (idx 37) tveeprom 2-0050: decoder processor is CX25843 (idx 30) tveeprom 2-0050: has radio, has no IR remote ivtv1: This is the second unit of a PVR500 ivtv1: Correcting tveeprom data: no radio present on second unit ivtv1: Encoder revision: 0x02050032 ivtv1: Registered device video1 for encoder MPEG ivtv1: Registered device video33 for encoder YUV ivtv1: Registered device vbi1 for encoder VBI ivtv1: Registered device video25 for encoder PCM audio tuner 2-0061: type set to 73 (Samsung TCPG 6121P30A) ivtv1: Initialized WinTV PVR 500 (unit #2), card #1 ivtv: ==================== END INIT IVTV ====================
turtle:~ # lspci -v
00:00.0 Host bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory
Controller Hub (rev 04)
Subsystem: Hewlett-Packard Company Unknown device 2a08
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:01.0 PCI bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL PCI Express Root
Port (rev 04) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: b8000000-bfefffff
Prefetchable memory behind bridge: c0000000-d7ffffff
Capabilities: [88] Subsystem: Hewlett-Packard Company Unknown device
2a08
Capabilities: [80] Power Management version 2
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable+
Capabilities: [a0] Express Root Port (Slot+) IRQ 0
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
High Definition Audio Controller (rev 03)
Subsystem: Hewlett-Packard Company PufferM-UL8E
Flags: bus master, fast devsel, latency 0, IRQ 169
Memory at b7ffc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Capabilities: [70] Express Unknown type IRQ 0
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI
Express Port 1 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable+
Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device
2a0a
Capabilities: [a0] Power Management version 2
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device 2a0a
Flags: bus master, medium devsel, latency 0, IRQ 217
I/O ports at 8800 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device 2a0a
Flags: bus master, medium devsel, latency 0, IRQ 209
I/O ports at 9000 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device 2a0a
Flags: bus master, medium devsel, latency 0, IRQ 201
I/O ports at 9400 [size=32]
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #4 (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device 2a0a
Flags: bus master, medium devsel, latency 0, IRQ 169
I/O ports at 9800 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Unknown device 2a0a
Flags: bus master, medium devsel, latency 0, IRQ 217
Memory at b7ffbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3) (prog-if 01
[Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=04, sec-latency=32
I/O behind bridge: 0000c000-0000efff
Memory behind bridge: bff00000-bfffffff
Prefetchable memory behind bridge: 00000000d8000000-00000000dfffffff
Capabilities: [50] Subsystem: Hewlett-Packard Company Unknown device
2a0a
00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface
Bridge (rev 03)
Subsystem: Hewlett-Packard Company Unknown device 2a0a
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Unknown device 2a0a
Flags: bus master, medium devsel, latency 0, IRQ 201
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at ffa0 [size=16]
00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA
Controller (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Hewlett-Packard Company Unknown device 2a0a
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 209
I/O ports at 8400 [size=8]
I/O ports at 8000 [size=4]
I/O ports at 7800 [size=8]
I/O ports at 7400 [size=4]
I/O ports at 7000 [size=16]
Capabilities: [70] Power Management version 2
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus
Controller (rev 03)
Subsystem: Hewlett-Packard Company Unknown device 2a0a
Flags: medium devsel, IRQ 209
I/O ports at 0400 [size=32]
01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600] (rev
a2) (prog-if 00 [VGA])
Subsystem: Micro-Star International Co., Ltd. Unknown device 9814
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at b8000000 (32-bit, non-prefetchable) [size=64M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at be000000 (64-bit, non-prefetchable) [size=16M]
Expansion ROM at bfee0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Capabilities: [78] Express Endpoint IRQ 0
03:01.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller
(rev 80) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Unknown device 2a0c
Flags: bus master, medium devsel, latency 64, IRQ 225
Memory at bffff800 (32-bit, non-prefetchable) [size=2K]
I/O ports at d800 [size=128]
Capabilities: [50] Power Management version 2
03:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Hewlett-Packard Company Unknown device 2a0b
Flags: bus master, medium devsel, latency 64, IRQ 233
I/O ports at d400 [size=256]
Memory at bffff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
03:04.0 PCI bridge: Hint Corp HB6 Universal PCI-PCI bridge (non-transparent
mode) (rev 11) (prog-if 00 [Normal decode])
Flags: bus master, medium devsel, latency 64
Bus: primary=03, secondary=04, subordinate=04, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Prefetchable memory behind bridge: d8000000-dfffffff
Capabilities: [80] Power Management version 2
Capabilities: [90] #06 [0000]
03:05.0 Communication controller: Agere Systems V.92 56K WinModem (rev 03)
Subsystem: Agere Systems Unknown device 044c
Flags: bus master, medium devsel, latency 64, IRQ 255
Memory at bffff000 (32-bit, non-prefetchable) [size=256]
I/O ports at d000 [size=8]
I/O ports at c800 [size=256]
Capabilities: [f8] Power Management version 2
04:08.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416)
MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR 500 (1st unit)
Flags: bus master, medium devsel, latency 64, IRQ 169
Memory at dc000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
04:09.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416)
MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR 500 (2nd unit)
Flags: bus master, medium devsel, latency 64, IRQ 50
Memory at d8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
turtle:~ #
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
