I'm using KnoppMyth R5D1 with a P4-2ghz, PVR350,
512meg ram.  I upgraded to ivtv 0.7.3 and tonight had
a problem where the screen froze for absolutely no
reason.  We were watching a previously recorded show,
not live tv.  

The logs are below.  Please give me a clue here.  I
upgraded since this version supposedly fixed some
stuff for PVR350 users.

Thanks,

Abs

2006-12-28 20:20:56.581     1138 @ Thu Dec 28 20:00:00
2006 in use by recorder o
n mythtv
2006-12-28 20:20:56.582 AutoExpire:
ExpireLiveTV(10000)
2006-12-28 20:20:56.588 AutoExpire:
SendDeleteMessages. Nothing to expire.
2006-12-28 20:20:56.589 AutoExpire:
ExpireLiveTV(10001)
2006-12-28 20:20:56.595 AutoExpire:
SendDeleteMessages. Nothing to expire.
2006-12-28 20:20:56.610 AutoExpire: Checking episode
count for each recording pr
ofile using max episodes
select timeout - ivtv driver has stopped responding


from /var/log/messages:
Dec 28 20:13:57 mythtv -- MARK --
Dec 28 20:21:09 mythtv kernel: ivtv0 warning: ENC:
REG_DMAXFER 2 wait failed
Dec 28 20:21:09 mythtv kernel: ivtv0 warning: ENC: (0)
DMA Error 0x00000000 0000
0001
Dec 28 20:21:09 mythtv kernel: ivtv0 warning: DMA_TO:
REG_DMAXFER 2 wait failed
Dec 28 20:21:10 mythtv kernel: ivtv0 warning: ENC:
REG_DMAXFER 2 wait failed
Dec 28 20:21:10 mythtv kernel: ivtv0 warning: ENC: (1)
DMA Error 0x00000000 0000
0001
Dec 28 20:21:10 mythtv kernel: ivtv0 warning: ENC:
REG_DMAXFER 2 wait failed
Dec 28 20:21:10 mythtv kernel: ivtv0 warning: ENC: (2)
DMA Error 0x00000000 0000
0001
Dec 28 20:21:10 mythtv kernel: ivtv0 warning: ENC:
REG_DMAXFER 2 wait failed
Dec 28 20:21:10 mythtv kernel: ivtv0 warning: ENC: (3)
DMA Error 0x00000000 0000
0001
Dec 28 20:21:10 mythtv kernel: ivtv0 warning: ENC:
REDO DMA took too many tries.
Dec 28 20:21:10 mythtv kernel: ivtv0 warning: Error
Encoder DMA
Dec 28 20:21:10 mythtv kernel: ivtv0 warning: Couldn't
find start of buffer with
in the first 256 bytes

ivtv:  ==================== START INIT IVTV
====================
ivtv:  version 0.7.3 (tagged release) loading
ivtv:  Linux version: 2.6.17-chw-8 SMP preempt
mod_unload 586 gcc-3.4
ivtv:  In case of problems please include the debug
info between
ivtv:  the START INIT IVTV and END INIT IVTV lines,
along with
ivtv:  any module options, when mailing the ivtv-users
mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-350 card
(cx23415 based)
ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level,
low) -> IRQ 20
ivtv0: Unreasonably low latency timer, setting to 64
(was 32)
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver
#0)
saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver
#0)
msp3400 1-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c
driver #0)
msp3400 1-0040: MSP4448G-A2 supports radio, mode is
autodetect and autoselect
tveeprom 1-0050: Hauppauge model 48132, rev K268,
serial# 9868421
tveeprom 1-0050: tuner model is LG TAPE H001F MK3 (idx
68, type 47)
tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 1-0050: audio processor is MSP4448 (idx 27)
tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
tveeprom 1-0050: has radio, has IR remote
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144
bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144
bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Decoder revision: 0x02020023
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768
buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800
buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472
buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x
4608 buffers (2048KB total)
ivtv0: Create encoder radio stream
ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536
buffers (1024KB total)
ivtv0: Allocate DMA decoder VBI stream: 512 x 2048
buffers (1024KB total)
ivtv0: Create decoder VOUT stream
ivtv0: Allocate DMA decoder YUV stream: 24 x 43200
buffers (1024KB total)
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648
bytes)
tuner 1-0061: type set to 47 (LG NTSC (TAPE series))
ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
ivtv:  ====================  END INIT IVTV 
====================



__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to