Hi, Now it's hanging the box again. modprobe ivtv gives:
Dec 28 16:19:26 myth ivtv: ==================== START INIT IVTV ==================== Dec 28 16:19:26 myth ivtv: version 0.8.1 (tagged release) loading Dec 28 16:19:26 myth ivtv: Linux version: 2.6.18-gentoo-r4 mod_unload PENTIUM4 gcc-3.3 Dec 28 16:19:26 myth ivtv: In case of problems please include the debug info between Dec 28 16:19:26 myth ivtv: the START INIT IVTV and END INIT IVTV lines, along with Dec 28 16:19:26 myth ivtv: any module options, when mailing the ivtv-users mailinglist. Dec 28 16:19:26 myth ivtv0: Autodetected Hauppauge card (cx23415 based) Dec 28 16:19:26 myth ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 Dec 28 16:19:26 myth PCI: setting IRQ 10 as level-triggered Dec 28 16:19:26 myth ACPI: PCI Interrupt 0000:00:09.0[A] -Link [LNKB] -GSI 10 (level, low) -IRQ 10 Dec 28 16:19:26 myth ivtv0: Unreasonably low latency timer, setting to 64 (was 32) Dec 28 16:19:27 myth ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) Dec 28 16:19:27 myth ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) and then nothing at all. Any help appreciated! Thanks, Peter. Peter Spikings wrote: > Hi all, > > I've just done a long overdue upgrade of MythTV and related > software/drivers. I've sucessfully build ivtv version 0.8.1 using Gentoo > Portage but now the TV is showing a very snowy picture and has trouble > holding the picture in place vertically. It doesn't appear to make much > difference which input/output are used. Reloading saa7127 with > test_image=1 shows the test image in black and white, again very snowy > but the TV holds the picture OK. > > Debug output: > > Dec 28 16:19:26 myth ivtv: ==================== START INIT IVTV > ==================== > Dec 28 16:19:26 myth ivtv: version 0.8.1 (tagged release) loading > Dec 28 16:19:26 myth ivtv: Linux version: 2.6.18-gentoo-r4 mod_unload > PENTIUM4 gcc-3.3 > Dec 28 16:19:26 myth ivtv: In case of problems please include the debug > info between > Dec 28 16:19:26 myth ivtv: the START INIT IVTV and END INIT IVTV lines, > along with > Dec 28 16:19:26 myth ivtv: any module options, when mailing the > ivtv-users mailinglist. > Dec 28 16:19:26 myth ivtv0: Autodetected Hauppauge card (cx23415 based) > Dec 28 16:19:26 myth ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 > Dec 28 16:19:26 myth PCI: setting IRQ 10 as level-triggered > Dec 28 16:19:26 myth ACPI: PCI Interrupt 0000:00:09.0[A] -Link [LNKB] > -GSI 10 (level, low) -IRQ 10 > Dec 28 16:19:26 myth ivtv0: Unreasonably low latency timer, setting to > 64 (was 32) > Dec 28 16:19:27 myth ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 > bytes) > Dec 28 16:19:27 myth ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 > bytes) > Dec 28 16:19:27 myth msp3400 0-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c > driver #0) > Dec 28 16:19:27 myth msp3400 0-0040: MSP4418G-A2 supports nicam and > radio, mode is autodetect and autoselect > Dec 28 16:19:27 myth saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c > driver #0) > Dec 28 16:19:27 myth saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c > driver #0) > Dec 28 16:19:27 myth tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) > Dec 28 16:19:27 myth tveeprom 0-0050: Hauppauge model 48135, rev J324, > serial# 7249076 > Dec 28 16:19:27 myth tveeprom 0-0050: tuner model is Philips FM1246 (idx > 24, type 1) > Dec 28 16:19:27 myth tveeprom 0-0050: TV standards PAL(I) (eeprom 0x10) > Dec 28 16:19:27 myth tveeprom 0-0050: audio processor is MSP4418 (idx 25) > Dec 28 16:19:27 myth tveeprom 0-0050: decoder processor is SAA7115 (idx 19) > Dec 28 16:19:27 myth tveeprom 0-0050: has radio, has IR remote > Dec 28 16:19:27 myth ivtv0: Autodetected Hauppauge WinTV PVR-350 > Dec 28 16:19:27 myth ivtv0: Encoder revision: 0x02050032 > Dec 28 16:19:27 myth ivtv0: Decoder revision: 0x02020023 > Dec 28 16:19:27 myth ivtv0: Registered device video0 for encoder MPEG > Dec 28 16:19:27 myth ivtv0: Registered device video32 for encoder YUV > Dec 28 16:19:27 myth ivtv0: Registered device vbi0 for encoder VBI > Dec 28 16:19:27 myth ivtv0: Registered device video24 for encoder PCM audio > Dec 28 16:19:27 myth ivtv0: Registered device radio0 for encoder radio > Dec 28 16:19:27 myth ivtv0: Registered device video16 for decoder MPEG > Dec 28 16:19:27 myth ivtv0: Registered device vbi8 for decoder VBI > Dec 28 16:19:27 myth ivtv0: Registered device vbi16 for decoder VOUT > Dec 28 16:19:27 myth ivtv0: Registered device video48 for decoder YUV > Dec 28 16:19:27 myth udevd-event[6263]: udev_node_symlink: > symlink(v4l/video0, /dev/video0) failed: File exists > Dec 28 16:19:27 myth udevd-event[6264]: udev_node_symlink: > symlink(v4l/video32, /dev/video32) failed: File exists > Dec 28 16:19:27 myth udevd-event[6265]: udev_node_symlink: > symlink(v4l/vbi0, /dev/vbi0) failed: File exists > Dec 28 16:19:27 myth udevd-event[6266]: udev_node_symlink: > symlink(v4l/video24, /dev/video24) failed: File exists > Dec 28 16:19:27 myth udevd-event[6267]: udev_node_symlink: > symlink(v4l/radio0, /dev/radio0) failed: File exists > Dec 28 16:19:27 myth udevd-event[6268]: udev_node_symlink: > symlink(v4l/video16, /dev/video16) failed: File exists > Dec 28 16:19:27 myth udevd-event[6269]: udev_node_symlink: > symlink(v4l/vbi8, /dev/vbi8) failed: File exists > Dec 28 16:19:27 myth udevd-event[6299]: udev_node_symlink: > symlink(v4l/vbi16, /dev/vbi16) failed: File exists > Dec 28 16:19:27 myth udevd-event[6300]: udev_node_symlink: > symlink(v4l/video48, /dev/video48) failed: File exists > Dec 28 16:19:28 myth ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 > bytes) > Dec 28 16:19:28 myth tuner 0-0061: type set to 1 (Philips PAL_I (FI1246 > and compatibles)) > Dec 28 16:19:28 myth ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 > Dec 28 16:19:28 myth ivtv: ====================== NEXT CARD > ====================== > Dec 28 16:19:28 myth ivtv1: Autodetected Hauppauge card (cx23416 based) > Dec 28 16:19:28 myth ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12 > Dec 28 16:19:28 myth PCI: setting IRQ 12 as level-triggered > Dec 28 16:19:28 myth ACPI: PCI Interrupt 0000:00:0a.0[A] -Link [LNKC] > -GSI 12 (level, low) -IRQ 12 > Dec 28 16:19:28 myth ivtv1: Unreasonably low latency timer, setting to > 64 (was 32) > Dec 28 16:19:28 myth spurious 8259A interrupt: IRQ7. > Dec 28 16:19:29 myth ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 > bytes) > Dec 28 16:19:29 myth msp3400 1-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c > driver #1) > Dec 28 16:19:29 myth msp3400 1-0040: MSP4418G-A2 supports nicam and > radio, mode is autodetect and autoselect > Dec 28 16:19:29 myth saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c > driver #1) > Dec 28 16:19:29 myth tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #1) > Dec 28 16:19:29 myth tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner) > Dec 28 16:19:29 myth tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1) > Dec 28 16:19:29 myth tveeprom 1-0050: Hauppauge model 32569, rev B252, > serial# 7019356 > Dec 28 16:19:29 myth tveeprom 1-0050: tuner model is Microtune 4049 FM5 > (idx 52, type 45) > Dec 28 16:19:29 myth tveeprom 1-0050: TV standards PAL(B/G) PAL(I) > SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) > Dec 28 16:19:29 myth tveeprom 1-0050: audio processor is MSP4418 (idx 25) > Dec 28 16:19:29 myth tveeprom 1-0050: decoder processor is SAA7115 (idx 19) > Dec 28 16:19:29 myth tveeprom 1-0050: has radio, has no IR remote > Dec 28 16:19:29 myth ivtv1: Autodetected Hauppauge WinTV PVR-250 > Dec 28 16:19:29 myth ivtv1: Encoder revision: 0x02050032 > Dec 28 16:19:29 myth ivtv1: Registered device video1 for encoder MPEG > Dec 28 16:19:29 myth ivtv1: Registered device video33 for encoder YUV > Dec 28 16:19:29 myth ivtv1: Registered device vbi1 for encoder VBI > Dec 28 16:19:29 myth ivtv1: Registered device video25 for encoder PCM audio > Dec 28 16:19:29 myth ivtv1: Registered device radio1 for encoder radio > Dec 28 16:19:29 myth tuner 1-0061: type set to 45 (Microtune 4049 FM5) > Dec 28 16:19:29 myth udevd-event[6428]: udev_node_symlink: > symlink(v4l/video1, /dev/video1) failed: File exists > Dec 28 16:19:29 myth udevd-event[6429]: udev_node_symlink: > symlink(v4l/video33, /dev/video33) failed: File exists > Dec 28 16:19:29 myth udevd-event[6430]: udev_node_symlink: > symlink(v4l/vbi1, /dev/vbi1) failed: File exists > Dec 28 16:19:29 myth udevd-event[6431]: udev_node_symlink: > symlink(v4l/video25, /dev/video25) failed: File exists > Dec 28 16:19:29 myth udevd-event[6432]: udev_node_symlink: > symlink(v4l/radio1, /dev/radio1) failed: File exists > Dec 28 16:19:30 myth ivtv1: Initialized Hauppauge WinTV PVR-250, card #1 > Dec 28 16:19:30 myth ivtv: ==================== END INIT IVTV > ==================== > > I've just installed udev hence the "file exists" errors. Hopefully > that's not the cause of this! :) > > Output from lspci: > > 0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS 645xx > (rev 51) > 0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS]: Unknown > device 0003 > 0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL > Media IO] (rev 25) > 0000:00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus > Controller > 0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] > 0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems > [SiS] Sound Controller (rev a0) > 0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 > Controller (rev 0f) > 0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 > Controller (rev 0f) > 0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 > Controller > 0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] > SiS900 PCI Fast Ethernet (rev 91) > 0000:00:09.0 Multimedia video controller: Internext Compression Inc > iTVC15 MPEG-2 Encoder (rev 01) > 0000:00:0a.0 Multimedia video controller: Internext Compression Inc > iTVC16 (CX23416) MPEG-2 Encoder (rev 01) > 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AP > [Radeon 9600] > 0000:01:00.1 Display controller: ATI Technologies Inc RV350 AP [Radeon > 9600] (Secondary) > > As you may be able to tell 09.0 is a PVR-350 and 0a.0 is a PVR-250 > (which I haven't yet got around to using). > > I'm not sure what else to try! I was playing around with version 0.8.0 > but that was hanging the box, got as far as the below in the output and > then became totally unresponsive: > > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) > > TIA, > > Peter. > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users > > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
