I’m having the same problem Don Weeks posted here in October (http://ivtvdriver.org/pipermail/ivtv-users/2006-October/004469.html), tinny audio with a newer PVR-150. Any time I switch from the Myth menus to “Watch TV,” the tinniness occurs. Changing the channel fixes the problem, and it won’t reoccur until I back out of Live TV. If I’m watching TV (and have thus already corrected the tinny audio) and a recording begins, the audio records fine. However, if I’m playing around in a menu or watching another recording as a new recording begins, the new recording will have the tinny audio. I’m running KnoppMyth R5D1, so kernel 2.6.17. I’ve download the 0.7.3 driver and the newest firmware file(as of 12/31/06) in an attempt to correct the problem, but no luck. Here’s my output in case something’s obviously wrong. Thanks in advance for any help!
ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.7.3 (tagged release) loading ivtv: Linux version: 2.6.17-chw-8 SMP preempt mod_unload 586 gcc-3.4 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) PCI: Enabling device 0000:01:0b.0 (0110 -> 0112) ACPI: PCI Interrupt 0000:01:0b.0[A] -> GSI 18 (level, low) -> IRQ 18 tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) cx25840 1-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0) cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) tveeprom 1-0050: Hauppauge model 26132, rev F0B2, serial# 9329751 tveeprom 1-0050: tuner model is TCL M2523_5N_E (idx 112, type 4) tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 1-0050: audio processor is CX25841 (idx 35) tveeprom 1-0050: decoder processor is CX25841 (idx 28) tveeprom 1-0050: has no radio, has IR remote eth0: no IPv6 routers present ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 1-0061: type set to 50 (TCL 2002N) ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
