Thanks for replying. Here is my Ivtv INIT
==================== START INIT IVTV ====================
[ 40.960931] ivtv: version 0.7.3 (tagged release) loading
[ 40.960933] ivtv: Linux version: 2.6.17.13 SMP mod_unload K7 gcc-4.0
[ 40.960936] ivtv: In case of problems please include the debug info
between
[ 40.960939] ivtv: the START INIT IVTV and END INIT IVTV lines, along
with
[ 40.960941] ivtv: any module options, when mailing the ivtv-users
mailinglist.
[ 40.961056] ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416
based)
[ 40.961160] PCI: Found IRQ 7 for device 0000:00:0b.0
[ 40.961265] PCI: Sharing IRQ 7 with 0000:00:10.3
[ 40.961331] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[ 41.005243] tveeprom 0-0050: Hauppauge model 26032, rev C199, serial#
8002200
[ 41.005251] tveeprom 0-0050: tuner model is TCL 2002N 5H (idx 99,
type 50)
[ 41.005255] tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
[ 41.005259] tveeprom 0-0050: audio processor is CX25841 (idx 35)
[ 41.005262] tveeprom 0-0050: decoder processor is CX25841 (idx 28)
[ 41.005265] tveeprom 0-0050: has no radio, has IR remote
[ 41.084241] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[ 41.287142] cx25840 0-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)
[ 41.426371] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by
Donald Becker
[ 44.826500] cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
[ 44.859898] nvidia: module license 'NVIDIA' taints kernel.
[ 45.021389] FDC 0 is a post-1991 82077
[ 45.134093] wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
[ 45.210958] irda_init()
[ 45.210998] NET: Registered protocol family 23
[ 45.257071] usbcore: registered new driver hiddev
[ 45.275010] input: BTC USB Multimedia Cordless Kit as
/class/input/input1
[ 45.275048] input: USB HID v1.00 Keyboard [BTC USB Multimedia
Cordless Kit ] on usb-0000:00:10.1-2
[ 45.350929] input: BTC USB Multimedia Cordless Kit as
/class/input/input2
[ 45.351002] input,hiddev96: USB HID v1.00 Mouse [BTC USB Multimedia
Cordless Kit ] on usb-0000:00:10.1-2
[ 45.351020] usbcore: registered new driver usbhid
[ 45.351025] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 45.665332] ts: Compaq touchscreen protocol output
[ 45.978843] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
[ 46.198177] ivtv0: Encoder revision: 0x02050032
[ 46.198246] ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768
buffers (4096KB total)
[ 46.198513] ivtv0: Allocate DMA encoder YUV stream: 194 x 10800
buffers (2048KB total)
[ 46.198807] ivtv0: Allocate DMA encoder VBI stream: 120 x 17472
buffers (2048KB total)
[ 46.199017] ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608
buffers (2048KB total)
[ 46.199690] tuner 0-0061: type set to 50 (TCL 2002N)
[ 46.309349] ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
[ 46.309471] PCI: Found IRQ 11 for device 0000:00:12.0
[ 46.309546] PCI: Sharing IRQ 11 with 0000:00:10.0
[ 46.313676] eth0: VIA Rhine II at 0x1ec00, 00:0d:87:9c:07:12, IRQ 11.
[ 46.314394] eth0: MII PHY found at address 1, status 0x786d
advertising 05e1 Link 45e1.
[ 46.330168] gameport: EMU10K1 is pci0000:00:0a.1/gameport0, io
0xd400, speed 1217kHz
[ 46.331637] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8774
Tue Aug 1 20:54:08 PDT 2006
[ 46.588380] PCI: Found IRQ 5 for device 0000:00:0a.0
[ 46.588479] PCI: Sharing IRQ 5 with 0000:00:10.2
[ 46.623054] ivtv: ====================== NEXT CARD
======================
[ 46.623065] ivtv1: Autodetected Hauppauge WinTV PVR-150 card (cx23416
based)
[ 46.623231] ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
[ 46.669192] tuner 1-0060: TEA5767 detected.
[ 46.669196] tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #1)
[ 46.669240] tuner 1-0060: type set to 62 (Philips TEA5767HN FM Radio)
[ 46.669478] tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1)
[ 46.856993] cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
[ 49.063670] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 50.719747] cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
[ 50.793243] wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1)
[ 50.850425] tveeprom 1-0050: Hauppauge model 23552, rev E587, serial#
8382081
[ 50.850433] tveeprom 1-0050: tuner model is Samsung TCPN 2121P30A
(idx 87, type 70)
[ 50.850438] tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
[ 50.850442] tveeprom 1-0050: second tuner model is Philips TEA5768HL
FM Radio (idx 101, type 62)
[ 50.850446] tveeprom 1-0050: audio processor is CX25843 (idx 37)
[ 50.850449] tveeprom 1-0050: decoder processor is CX25843 (idx 30)
[ 50.850452] tveeprom 1-0050: has radio, has no IR remote
[ 50.850456] ivtv1: This is the first unit of a PVR500
[ 51.198120] NET: Registered protocol family 10
[ 51.198251] lo: Disabled Privacy Extensions
[ 51.198449] IPv6 over IPv4 tunneling driver
[ 51.580088] ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
[ 51.799224] ivtv1: Encoder revision: 0x02050032
[ 51.799521] ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768
buffers (4096KB total)
[ 51.799926] ivtv1: Allocate DMA encoder YUV stream: 194 x 10800
buffers (2048KB total)
[ 51.800383] ivtv1: Allocate DMA encoder VBI stream: 120 x 17472
buffers (2048KB total)
[ 51.800728] ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608
buffers (2048KB total)
[ 51.801511] ivtv1: Create encoder radio stream
[ 51.801581] tuner 1-0061: type set to 70 (Samsung TCPN 2121P30A)
[ 51.927268] ivtv1: Initialized WinTV PVR 500 (unit #1), card #1
[ 51.928726] ivtv: ====================== NEXT CARD
======================
[ 51.928737] ivtv2: Autodetected Hauppauge WinTV PVR-150 card (cx23416
based)
[ 51.928883] ivtv2: Unreasonably low latency timer, setting to 64 (was 32)
[ 51.985314] tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #2)
[ 52.174138] cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #2)
[ 55.719399] cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
[ 55.792843] wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #2)
[ 55.849989] tveeprom 3-0050: Hauppauge model 23552, rev E587, serial#
8382081
[ 55.849996] tveeprom 3-0050: tuner model is Samsung TCPN 2121P30A
(idx 87, type 70)
[ 55.850001] tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08)
[ 55.850005] tveeprom 3-0050: second tuner model is Philips TEA5768HL
FM Radio (idx 101, type 62)
[ 55.850009] tveeprom 3-0050: audio processor is CX25843 (idx 37)
[ 55.850012] tveeprom 3-0050: decoder processor is CX25843 (idx 30)
[ 55.850015] tveeprom 3-0050: has radio, has no IR remote
[ 55.850019] ivtv2: This is the second unit of a PVR500
[ 55.850022] ivtv2: Correcting tveeprom data: no radio present on
second unit
[ 56.578920] ivtv2: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
[ 56.798016] ivtv2: Encoder revision: 0x02050032
[ 56.798363] ivtv2: Allocate DMA encoder MPEG stream: 128 x 32768
buffers (4096KB total)
[ 56.798795] ivtv2: Allocate DMA encoder YUV stream: 194 x 10800
buffers (2048KB total)
[ 56.799292] ivtv2: Allocate DMA encoder VBI stream: 120 x 17472
buffers (2048KB total)
[ 56.799670] ivtv2: Allocate DMA encoder PCM audio stream: 455 x 4608
buffers (2048KB total)
[ 56.800449] tuner 3-0061: type set to 70 (Samsung TCPN 2121P30A)
[ 56.923632] ivtv2: Initialized WinTV PVR 500 (unit #2), card #2
[ 56.923656] ivtv: ==================== END INIT IVTV
====================
Hans Verkuil wrote:
On Wednesday 03 January 2007 05:32, Craig Boline wrote:
Please help...
I have upgraded to Ivtv 7.3 and still have trouble with tinny audio.
I have a pvr-500 and would really like some help!
As far as I know the last tinny audio problems were fixed. Can you post
the IVTV INIT messages from the kernel log?
Hans
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
