Hi I have PVR-350 tv tuner, my computer is an AMD64 AM2 X2 3800+ and i use debian 4.0 etch testing with 2.6.18 kernel. So i installed ivtv 0.8, i followed howto/debian steps except the firmware installation because this link http://ivtv.writeme.ch/tiki-index.php?page=FirmwareVersions doesn't work.
So after the installation everything semms ok i use the ivtv-tune to set the freq, cat /dev/video0 > 1.mpg and the mplayer play this mpg but no signal. so i checked the kern.log but i find a warning msg kernel: ivtv0 warning: Encoder Firmware can be buggy, use version 0x02040011, 0x02040024 or 0x02050032. so i read again http://ivtvdriver.org/index.php/Firmware and i downloaded http://dl.ivtvdriver.org/ivtv/firmware/firmware.tar.gz i owerwrite my firmware files with these files, after that the warning messages disappered, but henceforward no signal.:( so i want to show you the kernel log maybe this is help, where i looking for the problem. Jan 30 09:38:44 lion kernel: ivtv: ==================== START INIT IVTV ==================== Jan 30 09:38:44 lion kernel: ivtv: version 0.8.2 (tagged release) loading Jan 30 09:38:44 lion kernel: ivtv: Linux version: 2.6.18-3-amd64 SMP mod_unload gcc-4.1 Jan 30 09:38:44 lion kernel: ivtv: In case of problems please include the debug info between Jan 30 09:38:44 lion kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with Jan 30 09:38:44 lion kernel: ivtv: any module options, when mailing the ivtv-users mailinglist. Jan 30 09:38:44 lion kernel: ivtv0: Autodetected Hauppauge card (cx23415 based) Jan 30 09:38:44 lion kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19 Jan 30 09:38:44 lion kernel: GSI 20 sharing vector 0x42 and IRQ 20 Jan 30 09:38:44 lion kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 66 Jan 30 09:38:44 lion kernel: input: ImPS/2 Generic Wheel Mouse as /class/input/input2 Jan 30 09:38:44 lion kernel: ts: Compaq touchscreen protocol output Jan 30 09:38:44 lion kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) Jan 30 09:38:44 lion kernel: ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) Jan 30 09:38:44 lion kernel: tveeprom 2-0050: Hauppauge model 48139, rev K2B7, serial# 9867798 Jan 30 09:38:44 lion kernel: tveeprom 2-0050: tuner model is Philips FM1216ME MK5 (idx 117, type 4) Jan 30 09:38:44 lion kernel: tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) Jan 30 09:38:44 lion kernel: tveeprom 2-0050: audio processor is MSP4418 (idx 25) Jan 30 09:38:44 lion kernel: tveeprom 2-0050: decoder processor is SAA7115 (idx 19) Jan 30 09:38:44 lion kernel: tveeprom 2-0050: has radio, has IR remote Jan 30 09:38:44 lion kernel: ivtv0: Autodetected Hauppauge WinTV PVR-350 Jan 30 09:38:44 lion kernel: ivtv0: tveeprom cannot autodetect tuner!<6>tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0) Jan 30 09:38:44 lion kernel: tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner) Jan 30 09:38:44 lion kernel: tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) Jan 30 09:38:44 lion kernel: saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) Jan 30 09:38:44 lion kernel: saa7127 2-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) Jan 30 09:38:44 lion kernel: msp3400 2-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0)Jan 30 09:38:44 lion kernel: msp3400 2-0040: MSP4418G-B3 supports nicam and radio, mode is autodetect and autoselect Jan 30 09:38:44 lion kernel: ivtv0: Encoder revision: 0x02050032 Jan 30 09:38:44 lion kernel: ivtv0: Decoder revision: 0x02020023 Jan 30 09:38:44 lion kernel: ivtv0: Registered device video0 for encoder MPEG Jan 30 09:38:44 lion kernel: ivtv0: Registered device video32 for encoder YUV Jan 30 09:38:44 lion kernel: ivtv0: Registered device vbi0 for encoder VBI Jan 30 09:38:44 lion kernel: ivtv0: Registered device video24 for encoder PCM audio Jan 30 09:38:44 lion kernel: ivtv0: Registered device radio0 for encoder radio Jan 30 09:38:44 lion kernel: ivtv0: Registered device video16 for decoder MPEG Jan 30 09:38:44 lion kernel: ivtv0: Registered device vbi8 for decoder VBI Jan 30 09:38:44 lion kernel: ivtv0: Registered device vbi16 for decoder VOUT Jan 30 09:38:44 lion kernel: ivtv0: Registered device video48 for decoder YUV Jan 30 09:38:44 lion kernel: ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) Jan 30 09:38:44 lion kernel: tuner 2-0061: tuner type not set Jan 30 09:38:44 lion kernel: tuner 2-0061: tuner type not set Jan 30 09:38:44 lion kernel: ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 Jan 30 09:38:44 lion kernel: ivtv: ==================== END INIT IVTV ==================== Thanks, Istvan ____________________________________________________________________________________ Any questions? Get answers on any topic at www.Answers.yahoo.com. Try it now. _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
