On 2/1/07, Chris Dos <[EMAIL PROTECTED]> wrote: > Well, I've been having some weirdness with my PVR-350 and PVR-150 cards. > Using kernel > 2.6.18 both cards work fine. Moving to 2.6.19 and 2.6.19.2, the 350 works > fine, but the > 150 does not. If I do a cat /dev/video3 > /tmp/test.mpg (I push the device > mappings to > video3 and video4) for the pvr-350 works fine, but if I do a cat /dev/video4 > > /tmp/test.mpg it results in a file with zero size. This behavior was the > same under 0.9.1 > and SVN trunk. I figured it was a bug in 2.6.19 and I would wait for 2.6.20 > before trying > it again.
Please provide INIT IVTV START to END and any module options you have for ivtv in /etc/modprobe.conf. > Well, I set up 2.6.20-rc7 and SVN wouldn't compile against it. I applied the > 10_workqueue_2.6.20.diff and was able to get it to compile, but the module > wouldn't load. > It would give me a "Unknown symbol i2c_bit_del_bus" when trying to modprobe. > I also > tried the 10_kernel-2.6.20-fix.diff patch, but this wouldn't patch against > SVN trunk. > Looking at all the improvements in 2.6.20, I guess this kernel has changed > quite a bit. > > So at this point, I guess I'll have to be patient and wait until trunk is > fixed or the > legacy driver is patched to work against 2.6.20. Hans will not update ivtv to work with 2.6.20 until it is actually is released. Greets Sander _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
