I am using mythtv. I would like to record both lang1 and lang2 on nicam.
However, the choice stereo doesn't work. I can choose stereo but the output is
lang1. The only choice to get lang2 is lang2. Did I set some wrong?
Jan 28 09:12:26 localhost kernel: ivtv: ==================== START INIT IVTV
====================
Jan 28 09:12:26 localhost kernel: ivtv: version 0.9.1 (tagged release) loading
Jan 28 09:12:26 localhost kernel: ivtv: Linux version: 2.6.19-1.2895.fc6 SMP
mod_unload 686 REGPARM 4KSTACKS
Jan 28 09:12:26 localhost kernel: ivtv: In case of problems please include the
debug info between
Jan 28 09:12:26 localhost kernel: ivtv: the START INIT IVTV and END INIT IVTV
lines, along with
Jan 28 09:12:26 localhost kernel: ivtv: any module options, when mailing the
ivtv-users mailinglist.
Jan 28 09:12:26 localhost kernel: input: PC Speaker as /class/input/input2
Jan 28 09:12:26 localhost kernel: intel8x0_measure_ac97_clock: measured 50665
usecs
Jan 28 09:12:26 localhost kernel: intel8x0: clocking to 48000
Jan 28 09:12:26 localhost kernel: ivtv0: Autodetected Hauppauge card (cx23415
based)
Jan 28 09:12:26 localhost kernel: ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 16
(level, low) -> IRQ 17
Jan 28 09:12:26 localhost kernel: ivtv0: Unreasonably low latency timer,
setting to 64 (was 32)
Jan 28 09:12:26 localhost kernel: nvidia: module license 'NVIDIA' taints kernel.
Jan 28 09:12:26 localhost kernel: 8139too Fast Ethernet driver 0.9.28
Jan 28 09:12:26 localhost kernel: Floppy drive(s): fd0 is 1.44M
Jan 28 09:12:26 localhost kernel: FDC 0 is a post-1991 82077
Jan 28 09:12:26 localhost kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware
(262144 bytes)
Jan 28 09:12:26 localhost kernel: ivtv0: loaded v4l-cx2341x-dec.fw firmware
(262144 bytes)
Jan 28 09:12:26 localhost kernel: tveeprom 1-0050: Hauppauge model 48055, rev
I111, serial# 6139400
Jan 28 09:12:26 localhost kernel: tveeprom 1-0050: tuner model is Philips
FI1246 MK2 (idx 11, type 1)
Jan 28 09:12:26 localhost kernel: tveeprom 1-0050: TV standards PAL(I) (eeprom
0x10)
Jan 28 09:12:26 localhost kernel: tveeprom 1-0050: audio processor is MSP3415
(idx 6)
Jan 28 09:12:26 localhost kernel: tveeprom 1-0050: decoder processor is SAA7115
(idx 19)
Jan 28 09:12:26 localhost kernel: tveeprom 1-0050: has no radio, has IR remote
Jan 28 09:12:26 localhost kernel: ivtv0: Autodetected Hauppauge WinTV PVR-250
Jan 28 09:12:26 localhost kernel: tuner 1-0061: chip found @ 0xc2 (ivtv i2c
driver #0)
Jan 28 09:12:26 localhost kernel: saa7115 1-0021: saa7115 found
(1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
Jan 28 09:12:26 localhost kernel: msp3400 1-0040: MSP3415G-B8 found @ 0x80
(ivtv i2c driver #0)
Jan 28 09:12:26 localhost kernel: msp3400 1-0040: MSP3415G-B8 supports nicam
and radio, mode is autodetect and autoselect
Jan 28 09:12:26 localhost kernel: ivtv0: Encoder revision: 0x02050032
Jan 28 09:12:26 localhost kernel: ivtv0: Decoder revision: 0x02020023
Jan 28 09:12:26 localhost kernel: ivtv0: Registered device video0 for encoder
MPEG
Jan 28 09:12:26 localhost kernel: ivtv0: Registered device video32 for encoder
YUV
Jan 28 09:12:26 localhost kernel: ivtv0: Registered device vbi0 for encoder VBI
Jan 28 09:12:26 localhost kernel: ivtv0: Registered device video24 for encoder
PCM audio
Jan 28 09:12:26 localhost kernel: tuner 1-0061: type set to 1 (Philips PAL_I
(FI1246 and compatibles))
Jan 28 09:12:26 localhost kernel: ivtv0: Initialized Hauppauge WinTV PVR-250,
card #0
Jan 28 09:12:26 localhost kernel: ivtv: ==================== END INIT IVTV
====================
____________________________________________________________________________________
Now that's room service! Choose from over 150,000 hotels
in 45,000 destinations on Yahoo! Travel to find your fit.
http://farechase.yahoo.com/promo-generic-14795097
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
