Hi,
I am using Mepis 6, and followed the install instructions for IVTV from
here : https://help.ubuntu.com/community/Install_IVTV_Dapper
Synaptic shows the version of ivtv-source as: 0.4.8-0ubuntu0ivtv2
ivtv-firmware version shows as: 0.20061007
kernel version 2.6.15-27
Everything went fine, and ivtv seems to initialize ok, but not detect my
device. From my dmesg output:
[17180048.448000] ivtv: ==================== START INIT IVTV
====================
[17180048.448000] ivtv: version 0.4.8 (tagged release) loading
[17180048.448000] ivtv: Linux version: 2.6.15-27-386 preempt 486 gcc-4.0
[17180048.448000] ivtv: In case of problems please include the debug
info between
[17180048.448000] ivtv: the START INIT IVTV and END INIT IVTV lines,
along with
[17180048.448000] ivtv: any module options, when mailing the ivtv-users
mailinglist.
[17180048.448000] ivtv: ==================== END INIT IVTV
====================
Also, lsusb -v provides the following on my PVR:
Bus 001 Device 003: ID 2040:2400 Hauppauge
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x2040 Hauppauge
idProduct 0x2400
bcdDevice 8.00
iManufacturer 1 Hauppauge
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 60
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
But alas, I have no /dev/videoX and the dmesg output from ivtv does not
seem to initialize my device.
I've scoured the web off and on over the past couple months, and have
been unable to find anything to help me get the device working.
Any help would be appreciated.
Thanks!
CJ
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
