On Monday 05 February 2007 11:53, Sander Sweers wrote:
> On 2/4/07, Han Wessels <[EMAIL PROTECTED]> wrote:
> > Hi all,
> >
> > It seems that a dependency is missing in my ivtv
> > kernel module and I have no idea how to get it back. I
> > have a PVR-500 and on startup the cx25840.ko and
> > wm8775.ko modules do not load automatically, resulting
> > in an error message from i2c (see log below). When I
> > manually load the two modules before ivtv, everything
> > works fine.
>
> When building ivtv it checks the kernel config if the option is build
> in or build as a module. So if the config has them listed as build in
> it will not attempt to auto load and not put them as a dependency.
>
> Check the config with vim /usr/src/linux-`uname -r`/.config. Or
> something similar but important to check with uname the exact version
> you are running.
>
> > First, here's the dmesg dump:
> >
> > ivtv: no version for "cx2341x_ext_ctrls" found: kernel
> > tainted.
>
> Strange message but I have no idea what it means. Anybody?
It means that the cx2341x kernel module wasn't build.
See NOTE 3 in the ivtv-0.9.x README. It explains which modules to turn
on in the kernel.
Regards,
Hans
>
> Greets
> Sander
>
> > ivtv: ==================== START INIT IVTV
> > ====================
> > ivtv: version 0.9.1 (tagged release) loading
> > ivtv: Linux version: 2.6.19.155 SMP mod_unload 586
> > REGPARM
> > ivtv: In case of problems please include the debug
> > info between
> > ivtv: the START INIT IVTV and END INIT IVTV lines,
> > along with
> > ivtv: any module options, when mailing the
> > ivtv-users mailinglist.
> > ivtv0: Autodetected Hauppauge card (cx23416 based)
> > ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 18 (level,
> > low) -> IRQ 17
> > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144
> > bytes)
> > NET: Registered protocol family 17
> > tveeprom 1-0050: Hauppauge model 23559, rev D596,
> > serial# 9822730
> > tveeprom 1-0050: tuner model is Samsung TCPG 6121P30A
> > (idx 96, type 73)
> > tveeprom 1-0050: TV standards PAL(B/G) PAL(I)
> > SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
> > tveeprom 1-0050: second tuner model is Philips
> > TEA5768HL FM Radio (idx 101, type 62)
> > tveeprom 1-0050: audio processor is CX25843 (idx 37)
> > tveeprom 1-0050: decoder processor is CX25843 (idx
> > 30)
> > tveeprom 1-0050: has radio, has no IR remote
> > ivtv0: Autodetected WinTV PVR 500 (unit #1)
> > tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
> > tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
> > tuner 1-0060: TEA5767 detected.
> > tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0)
> > tuner 1-0060: type set to 62 (Philips TEA5767HN FM
> > Radio)
> > tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> > ivtv0: Encoder revision: 0x02050032
> > ivtv0: Registered device video0 for encoder MPEG
> > ivtv0: Registered device video32 for encoder YUV
> > ivtv0: Registered device vbi0 for encoder VBI
> > ivtv0: Registered device video24 for encoder PCM
> > audio
> > ivtv0: Registered device radio0 for encoder radio
> > tuner 1-0061: type set to 73 (Samsung TCPG 6121P30A)
> > ivtv0: i2c hardware 0x00000001 (cx2584x) not found
> > for command 0xc008561c!
> > ivtv0: i2c addr 0x44 not found for command
> > 0x4008646f!
> > ivtv0: i2c hardware 0x00000020 (wm8775) not found for
> > command 0x4008646d!
> > ivtv0: i2c hardware 0x00000001 (cx2584x) not found
> > for command 0x4008646d!
> > ivtv0: i2c hardware 0x00000001 (cx2584x) not found
> > for command 0xc008561c!
> > ivtv0: i2c hardware 0x00000001 (cx2584x) not found
> > for command 0xc008561c!
> > ivtv0: i2c hardware 0x00000001 (cx2584x) not found
> > for command 0xc008561c!
> > ivtv0: Initialized WinTV PVR 500 (unit #1), card #0
> > ivtv: ====================== NEXT CARD
> > ======================
>
> <snip>
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
