On 2/8/07, Sander Sweers <[EMAIL PROTECTED]> wrote: > Roger Depreeuw wrote: > > On Thu, 2007-02-08 at 17:18 +0100, Morten Feldthaus wrote: > >> Hi > >> > >> I'm trying to get my PVR-350 to work in Linux. First I tried installing it > >> on a > >> VIA EPIA computer using Ubuntu Edgy. I followed the guide at > >> https://help.ubuntu.com/community/Install_IVTV_Edgy > >> > >> I get the following errors in dmesg: > >> ivtv0: Autodetected Hauppauge WinTV PVR-350 > >> ivtv0 warning: Encoder mailbox not found > >> ivtv0 warning: invalid api mailbox > >> ivtv0 warning: Encoder firmware dead! > >> ivtv0: Error initializing firmware > >> ivtv0: Error -19 on initialization > >> > >> Now i've installed the newest Mythdora on my AMD 1700+ and I'm getting the > >> same > >> error. I've tried compiling the newest 0.7.x driver from ivtvdriver.org > >> without > >> any luck. > >> > >> Do you guys have any suggestions? Is the card dead? > >> > > There is an issue about new firmware files that need to have a fixed > > length. > > Download the new released ivtv package and you'll find a new encoder > > firmware file. Hope this helps > > Good luck > > Always include the whole INIT IVTV and any module options you have in > /etc/modprobe.conf.This is essential informations.
I don't have any modprobe.conf and I don't use any module options. Here's the complete dmesg output: [17179769.268000] ivtv: ==================== START INIT IVTV ==================== [17179769.268000] ivtv: version 0.7.3 (tagged release) loading [17179769.268000] ivtv: Linux version: 2.6.17-10-386 mod_unload 486 REGPARM gcc-4.1 [17179769.268000] ivtv: In case of problems please include the debug info between [17179769.268000] ivtv: the START INIT IVTV and END INIT IVTV lines, along with [17179769.268000] ivtv: any module options, when mailing the ivtv-users mailinglist. [17179769.268000] ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based) [17179769.272000] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [17179769.348000] tveeprom 1-0050: Hauppauge model 48139, rev K2B7, serial# 8660755 [17179769.348000] tveeprom 1-0050: tuner model is Philips FM1216ME MK5 (idx 117, type 4) [17179769.348000] tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) [17179769.348000] tveeprom 1-0050: audio processor is MSP4418 (idx 25) [17179769.348000] tveeprom 1-0050: decoder processor is SAA7115 (idx 19) [17179769.348000] tveeprom 1-0050: has radio, has IR remote [17179769.436000] tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) [17179769.636000] tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #0) [17179769.728000] saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) [17179769.940000] saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) [17179769.996000] msp3400 1-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0) [17179769.996000] msp3400 1-0040: MSP4418G-B3 supports nicam and radio, mode is autodetect and autoselect [17179770.704000] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) [17179770.796000] ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) [17179771.028000] ivtv0 warning: Encoder mailbox not found [17179771.028000] ivtv0 warning: invalid api mailbox [17179771.028000] ivtv0 warning: Encoder firmware dead! [17179771.036000] ivtv0: Error initializing firmware [17179771.048000] ivtv0: Error -19 on initialization [17179771.048000] ivtv: ==================== END INIT IVTV ==================== > On top of Roger's suggestion, does it work in windows? I've just installed the board on Windows, but all I get is a black area where the picture was supposed to be. -- Morten Feldthaus _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
