Is the audio firmware installed? /lib/firmware/v4l-cx25840.fw
On 2/12/07, Linux TV homemaillist <[EMAIL PROTECTED]> wrote: > Hi. > > I've installed a new PVR-150 card but can't get any audio out of it. The > video works fine with 'v4l2-ctl -i 0' (etc) then 'mplayer /dev/video0', > 'VDR' or 'cat /dev/video0'. But nothing produces any audio! > > If I play this under windows, there are 2 audio tracks, but no sound. > > IVTV-radio also produces no sound: > > ivtv-radio -f 90.9 > > > Any ideas? > > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.8.2 (tagged release) loading > ivtv: Linux version: 2.6.18-1.2257.fc5 mod_unload 686 REGPARM 4KSTACKS > gcc-4.1 > ivtv: In case of problems please include the debug info between > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > ivtv: any module options, when mailing the ivtv-users mailinglist. > ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) > -> IRQ 185 > PCI: VIA IRQ fixup for 0000:00:10.2, from 11 to 9 > uhci_hcd 0000:00:10.2: UHCI Host Controller > uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:10.2: irq 185, io base 0x0000dc00 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > ieee1394: Initialized config rom entry `ip1394' > ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) > -> IRQ 185 > PCI: VIA IRQ fixup for 0000:00:10.3, from 11 to 9 > uhci_hcd 0000:00:10.3: UHCI Host Controller > uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:10.3: irq 185, io base 0x0000e000 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > ivtv0: Autodetected Hauppauge card (cx23416 based) > ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 193 > ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > sd 0:0:0:0: Attached scsi generic sg0 type 0 > sd 1:0:0:0: Attached scsi generic sg1 type 0 > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > tveeprom 0-0050: Hauppauge model 26559, rev F089, serial# 10187014 > tveeprom 0-0050: tuner model is TCL MFPE05 2 (idx 89, type 38) > tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) > (eeprom 0x74) > tveeprom 0-0050: audio processor is CX25843 (idx 37) > tveeprom 0-0050: decoder processor is CX25843 (idx 30) > tveeprom 0-0050: has radio, has no IR remote > ivtv0: Autodetected Hauppauge WinTV PVR-150 > tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) > tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) > tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) > cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) > cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes) > wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) > ivtv0: Encoder revision: 0x02050032 > ivtv0: Registered device video0 for encoder MPEG > ivtv0: Registered device video32 for encoder YUV > ivtv0: Registered device vbi0 for encoder VBI > ivtv0: Registered device video24 for encoder PCM audio > ivtv0: Registered device radio0 for encoder radio > tuner 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) > ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 > ivtv: ==================== END INIT IVTV ==================== > > > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
