I took out the card and look for burnt chips or something unusual but
found nothing.
Then i press down the big black heat disipator on the card (on the
center of the card, is a big black square), i pressed hard and to the
sides, just in case something was not properly seated under it.
i reinserted the pvr-350 card and now i dont get the error about the
missing msp3400
will check if everything is working ok tomorrow.
On Feb 18, 2007, at 11:06 PM, Adrian de los Santos wrote:
I have a pvr-350 who was working fine for the last 6 months with
mythtv (knoppmyth r5e50) but i noticed that my recordings had no
sound for the last couple of days, resetting the system i found the
following message from the ivtv driver:
ivtv0: i2c hardware 0x00000008 (msp3400) not found for command
the msp3400 is the audio encoder, so thats why i dont have audio.
Help please..
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
