I have a PVR-150 and am trying to get a MythTV box working. I have found that after trying to get MythTV working that it was not recording all of my shows. Long story short I ended up testing the card by using cat /dev/video0 > 10min.mpg and playing the result. What I got was just over 7 min though I timed it and recorded it for 10 min (+/- a few seconds). I think I may have the card incorrectly configured. The original post is located at http://mythtv.org/pipermail/mythtv-users/2007-February/167868.html and here is a snippit from dmesg. If any further info is needed feel free to ask. Thanks in advance. -Thymus
ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.7.1 (tagged release) loading ivtv: Linux version: 2.6.17-2-686 SMP mod_unload 686 REGPARM gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 209 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) tveeprom 2-0050: Hauppauge model 26582, rev E6B2, serial# 9784951 tveeprom 2-0050: tuner model is TCL M2523_5N_E (idx 112, type 50) tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 2-0050: audio processor is CX25843 (idx 37) tveeprom 2-0050: decoder processor is CX25843 (idx 30) tveeprom 2-0050: has no radio, has no IR remote tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) Creative EMU10K1 PCI Audio Driver, version 0.20a, 16:56:49 Sep 13 2006 cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 2-0061: type set to 50 (TCL 2002N) ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ==================== END INIT IVTV ====================
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
