On Tue, 2007-03-06 at 22:36 +0100, Eric Maes wrote:
> Hi,
>
> I am trying to get my PVR-350 to work under Fedora 6 but am stuck at the
> very beginning 8-(.
> The card itself is OK as it works in the same dual-boot machine with
> Windows XP.
>
> I installed ivtv using the ATrpms and following the wiki.
>
> Here is some information on my current setup:
>
> #yum search ivtv | grep installed
> ivtv-kmdl-2.6.19-1.2911.fc6.i686 1:0.10.1-126.fc6.at
> ivtv_xdriver.i386 0.10.7-8_r3843.fc6.at
> ivtv-firmware.noarch 2:20070217-13.at
> ivtv.i386 1:0.10.1-126.fc6.at
> perl-Video-ivtv.i386 0.13-8.fc6.at
> perl-Video-Frequencies.noarch 0.03-4.fc6.at
>
> #lspci -v:
> 00:0a.0 Multimedia video controller: Internext Compression Inc iTVC15
> MPEG-2 Encoder (rev 01)
> Subsystem: Hauppauge computer works Inc. WinTV PVR-350
> Flags: bus master, medium devsel, latency 32, IRQ 11
> Memory at d8000000 (32-bit, prefetchable) [size=64M]
> Capabilities: [44] Power Management version 2
>
> #uname -a:
> Linux bilbo 2.6.19-1.2911.fc6 #1 SMP Sat Feb 10 15:51:47 EST 2007 i686
> i686 i386 GNU/Linux
>
After reading the message from Christopher Karel: "Problems loading
IVTV_FB on FC6", I noticed that he was using a more recent version of
the kernel and of ivtv-kmdl, so I updated my kernel to the same version.
After that, modprobe ivtv failed, stating that ivtv could not be
found...
I then did a yum remove of ivtv and a yum install of ivtv. This tried to
install the old version of ivtv-kmdl. I then did a yum install of
ivtv-kmdl-2.6.19-1.2911.6.5.fc6.
This is now my current situation which is exactly the same as
Christopher's:
rpm -qa --qf '%{name}-%{version}-%{release}.%{arch}\n' | egrep "^ivtv|
kernel"
ivtv-0.10.1-126.fc6.at.i386
ivtv_xdriver-0.10.7-8_r3843.fc6.at.i386
ivtv-kmdl-2.6.19-1.2911.fc6-0.10.1-126.fc6.at.i686
ivtv-firmware-20070217-13.at.noarch
kernel-devel-2.6.19-1.2911.fc6.i686
kernel-2.6.19-1.2911.fc6.i686
ivtv-kmdl-2.6.19-1.2911.6.5.fc6-0.10.1-126.fc6.at.i686
kernel-headers-2.6.19-1.2911.6.5.fc6.i386
kernel-devel-2.6.19-1.2911.6.5.fc6.i686
kernel-2.6.19-1.2911.6.5.fc6.i686
Contrary to Christopher however, ivtv doesn't load, I still get:
modprobe ivtv
FATAL: Error inserting ivtv
(/lib/modules/2.6.19-1.2911.6.5.fc6/updates/drivers/media/video/ivtv.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
dmesg:
ivtv: no version for "struct_module" found: kernel tainted.
ivtv: Unknown parameter `ivtv_std'
What does this actually refer to??
TIA - Eric
> modprobe.conf:
> options pwc index=1
> remove pwc { /usr/sbin/alsactl store 1 >/dev/null 2>&1
> || : ; }; /sbin/modprobe -r --ignore-remove pwc
> alias usb-controller ehci-hcd
> alias usb-controller1 ohci-hcd
> alias eth0 via-rhine
> options snd cards_limit=8
> alias snd-card-0 snd-emu10k1
> options snd-emu10k1 index=0 enable_ir=1 max_buffer_size=256
> alias snd-card-1 snd-mpu401
> options snd-mpu401 index=1
> # ivtv modules setup
> alias char-major-81 videodev
> alias char-major-81-0 ivtv
> options ivtv ivtv_std=2 tda9887=0
>
>
> >From dmesg:
>
> ivtv: no version for "struct_module" found: kernel tainted.
> ivtv: Unknown parameter `ivtv_std'
>
> And modprobe ivtv:
> FATAL: Error inserting ivtv
> (/lib/modules/2.6.19-1.2911.fc6/updates/drivers/media/video/ivtv.ko):
> Unknown symbol in module, or unknown parameter (see dmesg)
>
> Thank in advance!
>
>
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
