Hi *
Since some time my KnopMyth r5e50 started to have problems with
stability (hard hangs). It is almost always freeze at begining of
recording.
Looking into mythbackend.log after such hard freeze shows following
entries:
2007-04-25 19:00:03.168 TVRec(2): Changing from None to RecordingOnly
2007-04-25 19:00:03.186 TVRec(2): HW Tuner: 2->2
2007-04-25 19:00:03.491 MPEGRec(/dev/video1) Error: Error getting codec
params using old IVTV ioctl
eno: Bad address (14)
2007-04-25 19:00:03.492 Started recording: Fakty: channel 1005 on cardid
2, sourceid 1
2007-04-25 19:00:03.504 scheduler: Started recording: Fakty: channel
1005 on cardid 2, sourceid 1
Q to You people: is this stability problem might be realted rather to
ivtv or to pvr250 hardware ?
Config is:
Asusp5p800 mobo, D326, 512M ram, 3x320G WDC, 2xPVR250, 1xWinTV DVB-T.
Here is ivtv entries in log:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.8.2 (tagged release) loading
ivtv: Linux version: 2.6.18-chw-13 SMP preempt mod_unload 586 gcc-4.1
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
tveeprom 0-0050: Hauppauge model 90002, rev C176, serial# 44955
tveeprom 0-0050: MAC address is 00-0D-FE-00-AF-9B
tveeprom 0-0050: tuner model is Thompson DTT7592 (idx 76, type 4)
tveeprom 0-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
tveeprom 0-0050: audio processor is None (idx 0)
tveeprom 0-0050: decoder processor is CX882 (idx 25)
tveeprom 0-0050: has no radio, has IR remote
cx88[0]: hauppauge eeprom: model=90002
input: cx88 IR (Hauppauge Nova-T DVB-T as /class/input/input0
cx88[0]/0: found at 0000:02:0a.0, rev: 5, irq: 21, latency: 64, mmio:
0xf9000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
ACPI: PCI Interrupt 0000:02:0a.2[A] -> GSI 21 (level, low) -> IRQ 21
cx88[0]/2: found at 0000:02:0a.2, rev: 5, irq: 21, latency: 64, mmio:
0xfa000000
cx88[0]/2: cx2388x based dvb card
DVB: registering new adapter (cx88[0]).
DVB: registering frontend 0 (Conexant CX22702 DVB-T)...
ivtv0: Autodetected Hauppauge card (cx23415 based)
ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 17 (level, low) -> IRQ 20
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
msp3400 1-0040: MSP3415G-B8 found @ 0x80 (ivtv i2c driver #0)
msp3400 1-0040: MSP3415G-B8 supports nicam and radio, mode is autodetect
and autoselect
saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
tveeprom 1-0050: Hauppauge model 48054, rev I108, serial# 6133799
tveeprom 1-0050: tuner model is Philips FI1216 MK2 (idx 8, type 5)
tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04)
tveeprom 1-0050: audio processor is MSP3415 (idx 6)
tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
tveeprom 1-0050: has no radio, has IR remote
ivtv0: Autodetected Hauppauge WinTV PVR-250
ivtv0: Encoder revision: 0x02050032
ivtv0: Decoder revision: 0x02020023
ivtv0: Registered device video1 for encoder MPEG
ivtv0: Registered device video32 for encoder YUV
ivtv0: Registered device vbi1 for encoder VBI
ivtv0: Registered device video24 for encoder PCM audio
tuner 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
ivtv0: Initialized Hauppauge WinTV PVR-250, card #0
ivtv: ====================== NEXT CARD ======================
ivtv1: Autodetected Hauppauge card (cx23415 based)
ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 22 (level, low) -> IRQ 22
cx2388x blackbird driver version 0.0.6 loaded
ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv1: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1)
msp3400 2-0040: MSP3415G-B8 found @ 0x80 (ivtv i2c driver #1)
msp3400 2-0040: MSP3415G-B8 supports nicam and radio, mode is autodetect
and autoselect
saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #1)
tveeprom 2-0050: Hauppauge model 48014, rev F208, serial# 5194849
tveeprom 2-0050: tuner model is Philips FI1216 MK2 (idx 8, type 5)
tveeprom 2-0050: TV standards PAL(B/G) (eeprom 0x04)
tveeprom 2-0050: audio processor is MSP3415 (idx 6)
tveeprom 2-0050: has radio
ivtv1: Autodetected Hauppauge WinTV PVR-250
ivtv1: Encoder revision: 0x02050032
ivtv1: Decoder revision: 0x02020023
ivtv1: Registered device video2 for encoder MPEG
ivtv1: Registered device video33 for encoder YUV
ivtv1: Registered device vbi2 for encoder VBI
ivtv1: Registered device video25 for encoder PCM audio
ivtv1: Registered device radio1 for encoder radio
tuner 2-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
ivtv1: Initialized Hauppauge WinTV PVR-250, card #1
ivtv: ==================== END INIT IVTV ====================
begin:vcard
fn:Piotr Oniszczuk
n:Oniszczuk;Piotr
adr:;;KEN 49 m241;Warszawa;;02-797;Polska
email;internet:[EMAIL PROTECTED]
tel;work:+48 22 515 52 75
tel;home:+48 22 648 96 62
tel;cell:+48 508 047 160
version:2.1
end:vcard
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
