On Mon, Apr 23, 2007 at 11:33:25PM -0400, Rod wrote: > On Mon, Apr 23, 2007 at 09:27:49PM -0400, Rod wrote: > > On Sun, Apr 22, 2007 at 11:54:47PM -0600, Gerald Schepens wrote: > > > I bet the audio is a little high-pitched too. Am I right? > > > > Not that I notice.
OK so my wife just got back from a trip (hence the reason why I had taken the opportunty to update the mythbox) and without any prompting she said that in addition to the jumpiness, the voices were higher. I guess my old ears aren't that sensitive. > > > If so, you need to build the saa7127 module from source. There's a > > > howto at this link: > > > http://www.gossamer-threads.com/lists/ivtv/users/35059 > > > > OK, I can try that. I'm not really set up to build a kernel though. > > Started to follow instructions but got held up looking for rpmbuild. > > Myth box isn't set up for compiling kernel. Followed instructions from > the link and compiled on another machine with same kernel and copied > module to the myth box. I am assuming that the created module would be > compatible. Let me know if there is an error in my logic. Anyway, > rebooted myth box and get the same effect. Seems to make a jump in the > video every second. Difficult to tell if there is a difference in the > pitch of the audio. > > So I am as a loss as to how to proceed? Investigated this further. Postings indicates problems with video4linux and the PVR-350 so I removed the package and just loaded the saa7127 module (created using the howto reference above) on it's own and voila, I seem to be back in business. Thanks for all the help. Without this list I think I would still be pulling out my hair (which like my ears, is not what it used to be) Cheers, Rod > > Thanks again. > Rod > > > > > > Basically, you're building the one module. If you install video4linux, > > > it messes up the video capture for some reason. > > > > Thanks for the reply. I'll give it a try. > > > > Cheers, > > Rod > > > > > > On Mon, 2007-04-23 at 00:34 -0400, Rod wrote: > > > > Except for audio not working every now and then, things have been > > > > pretty > > > > well with running Myth. I recently upgraded my kernel and am now > > > > getting a jittery video output. Very noticeable with vertical > > > > scrolling > > > > credits. > > > > > > > > There seem to be quite a few changes in ivtv and video4linux since I > > > > last installed. > > > > > > > > Here is a copy of my dmesg output. > > > > > > > > ivtv: ==================== START INIT IVTV ==================== > > > > ivtv: version 0.10.1 (tagged release) loading > > > > ivtv: Linux version: 2.6.20-1.2944.fc6 SMP mod_unload 686 4KSTACKS > > > > ivtv: In case of problems please include the debug info between > > > > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > > > > ivtv: any module options, when mailing the ivtv-users mailinglist. > > > > ivtv0: Autodetected Hauppauge card (cx23416 based) > > > > PCI: Enabling device 0000:01:01.0 (0014 -> 0016) > > > > ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [LNKC] -> GSI 10 (level, > > > > low) -> IRQ 10 > > > > ieee1394: Initialized config rom entry `ip1394' > > > > input: PC Speaker as /class/input/input3 > > > > ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) > > > > Floppy drive(s): fd0 is 1.44M > > > > ivtv0: Encoder revision: 0x02060039 > > > > tveeprom 2-0050: Hauppauge model 32062, rev B185, serial# 7369525 > > > > tveeprom 2-0050: tuner model is TCL 2002N 6A (idx 85, type 50) > > > > tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) > > > > tveeprom 2-0050: audio processor is MSP3445 (idx 12) > > > > tveeprom 2-0050: decoder processor is SAA7115 (idx 19) > > > > tveeprom 2-0050: has no radio, has IR receiver, has no IR transmitter > > > > ivtv0: Autodetected Hauppauge WinTV PVR-250 > > > > tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) > > > > saa7115 2-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver > > > > #0) > > > > msp3400 2-0040: MSP3445G-B8 found @ 0x80 (ivtv i2c driver #0) > > > > msp3400 2-0040: MSP3445G-B8 supports radio, mode is autodetect and > > > > autoselect > > > > ivtv0: Registered device video0 for encoder MPEG (4 MB) > > > > ivtv0: Registered device video32 for encoder YUV (2 MB) > > > > ivtv0: Registered device vbi0 for encoder VBI (1 MB) > > > > ivtv0: Registered device video24 for encoder PCM audio (1 MB) > > > > tuner 2-0061: type set to 50 (TCL 2002N) > > > > FDC 0 is a National Semiconductor PC87306 > > > > ivtv0: Initialized Hauppauge WinTV PVR-250, card #0 > > > > ivtv: ====================== NEXT CARD ====================== > > > > ivtv1: Autodetected Hauppauge card (cx23415 based) > > > > PCI: Enabling device 0000:01:02.0 (0014 -> 0016) > > > > ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 > > > > PCI: setting IRQ 9 as level-triggered > > > > ACPI: PCI Interrupt 0000:01:02.0[A] -> Link [LNKB] -> GSI 9 (level, > > > > low) > > > > -> IRQ 9 > > > > ivtv1: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) > > > > ivtv1: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) > > > > ivtv1: Encoder revision: 0x02060039 > > > > ivtv1: Decoder revision: 0x02020023 > > > > tuner 3-0043: chip found @ 0x86 (ivtv i2c driver #1) > > > > tda9887 3-0043: tda988[5/6/7] found @ 0x43 (tuner) > > > > tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1) > > > > saa7115 3-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver > > > > #1) > > > > msp3400 3-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #1) > > > > msp3400 3-0040: MSP4448G-A2 supports radio, mode is autodetect and > > > > autoselect > > > > tveeprom 3-0050: The eeprom says no radio is present, but the tuner type > > > > tveeprom 3-0050: indicates otherwise. I will assume that radio is > > > > present. > > > > tveeprom 3-0050: Hauppauge model 48132, rev K268, serial# 8207794 > > > > tveeprom 3-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) > > > > tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08) > > > > tveeprom 3-0050: audio processor is MSP4448 (idx 27) > > > > tveeprom 3-0050: decoder processor is SAA7115 (idx 19) > > > > tveeprom 3-0050: has radio, has IR receiver, has no IR transmitter > > > > ivtv1: Autodetected Hauppauge WinTV PVR-350 > > > > saa7127 3-0044: saa7129 found @ 0x88 (ivtv i2c driver #1) > > > > ivtv1: Registered device video1 for encoder MPEG (4 MB) > > > > ivtv1: Registered device video33 for encoder YUV (2 MB) > > > > ivtv1: Registered device vbi1 for encoder VBI (1 MB) > > > > ivtv1: Registered device video25 for encoder PCM audio (1 MB) > > > > ivtv1: Registered device radio1 for encoder radio > > > > ivtv1: Registered device video17 for decoder MPEG (1 MB) > > > > ivtv1: Registered device vbi9 for decoder VBI (1 MB) > > > > ivtv1: Registered device vbi17 for decoder VOUT > > > > ivtv1: Registered device video49 for decoder YUV (1 MB) > > > > ivtv1: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) > > > > tuner 3-0061: type set to 47 (LG NTSC (TAPE series)) > > > > ivtv1: Initialized Hauppauge WinTV PVR-350, card #1 > > > > ivtv: ==================== END INIT IVTV ==================== > > > > PCI: Enabling device 0000:00:1f.5 (0000 -> 0001) > > > > ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 9 (level, > > > > low) > > > > -> IRQ 9 > > > > PCI: Setting latency timer of device 0000:00:1f.5 to 64 > > > > ivtv1-fb: Framebuffer at 0xf1510000, mapped to 0xe2110000, size 1665k > > > > ivtv1-fb: === Validated display mode === > > > > ivtv1-fb: Display size 640x400 (640x400 Virtual) @ 8bpp > > > > ivtv1-fb: Display position 41,41 > > > > ivtv1-fb: Display filter : on > > > > ivtv1-fb: Color space : RGB > > > > ivtv1-fb: === Display mode change === > > > > ivtv1-fb: Display size 640x400 (640x400 Virtual) @ 8bpp > > > > ivtv1-fb: Display position 41,41 > > > > ivtv1-fb: Display filter : on > > > > ivtv1-fb: Color space : RGB > > > > Console: switching to colour frame buffer device 80x25 > > > > ivtv1-fb: === Display mode change === > > > > ivtv1-fb: Display size 640x400 (640x400 Virtual) @ 8bpp > > > > ivtv1-fb: Display position 41,41 > > > > ivtv1-fb: Display filter : on > > > > ivtv1-fb: Color space : RGB > > > > ivtv1-fb: Framebuffer registered on ivtv card id 1 > > > > intel8x0_measure_ac97_clock: measured 50540 usecs > > > > intel8x0: clocking to 48000 > > > > ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 9 (level, > > > > low) > > > > -> IRQ 9 > > > > PCI: Enabling device 0000:01:00.0 (0014 -> 0016) > > > > ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKD] -> GSI 11 (level, > > > > low) -> IRQ 11 > > > > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] > > > > MMIO=[e4101000-e41017ff] Max Packet=[2048] IR/IT contexts=[4/4] > > > > lirc_dev: IR Remote Control driver registered, at major 61 > > > > bttv: driver version 0.9.17 loaded > > > > bttv: using 8 buffers with 2080k (520 pages) each for capture > > > > ieee1394: Host added: ID:BUS[0-00:1023] GUID[00004c010700244e] > > > > cx2388x v4l2 driver version 0.0.6 loaded > > > > lirc_i2c: chip found @ 0x18 (Hauppauge IR) > > > > lirc_dev: lirc_register_plugin: sample_rate: 10 > > > > lirc_i2c: chip found @ 0x18 (Hauppauge IR) > > > > lirc_dev: lirc_register_plugin: sample_rate: 10 > > > > lp0: using parport0 (interrupt-driven). > > > > lp0: console ready > > > > sonypi: Sony Programmable I/O Controller Driver v1.26. > > > > NET: Registered protocol family 10 > > > > lo: Disabled Privacy Extensions > > > > ivtv1-fb: === Validated display mode === > > > > ivtv1-fb: Display size 720x480 (720x480 Virtual) @ 32bpp > > > > ivtv1-fb: Display position 1,1 > > > > ivtv1-fb: Display filter : on > > > > ivtv1-fb: Color space : RGB > > > > ivtv1-fb: === Validated display mode === > > > > ivtv1-fb: Display size 720x480 (720x480 Virtual) @ 32bpp > > > > ivtv1-fb: Display position 1,1 > > > > ivtv1-fb: Display filter : on > > > > ivtv1-fb: Color space : RGB > > > > ivtv1-fb: === Display mode change === > > > > ivtv1-fb: Display size 720x480 (720x480 Virtual) @ 32bpp > > > > ivtv1-fb: Display position 1,1 > > > > ivtv1-fb: Display filter : on > > > > ivtv1-fb: Color space : RGB > > > > input: Power Button (FF) as /class/input/input4 > > > > ACPI: Power Button (FF) [PWRF] > > > > input: Power Button (CM) as /class/input/input5 > > > > ACPI: Power Button (CM) [PWRB] > > > > No dock devices found. > > > > ibm_acpi: ec object not found > > > > md: Autodetecting RAID arrays. > > > > md: autorun ... > > > > md: ... autorun DONE. > > > > device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: > > > > [EMAIL PROTECTED] > > > > device-mapper: multipath: version 1.0.5 loaded > > > > EXT3 FS on hda2, internal journal > > > > kjournald starting. Commit interval 5 seconds > > > > EXT3 FS on hda1, internal journal > > > > EXT3-fs: mounted filesystem with ordered data mode. > > > > kjournald starting. Commit interval 5 seconds > > > > EXT3 FS on hda5, internal journal > > > > EXT3-fs: mounted filesystem with ordered data mode. > > > > Adding 522104k swap on /dev/hda3. Priority:-1 extents:1 across:522104k > > > > eth0: setting full-duplex. > > > > Bluetooth: Core ver 2.11 > > > > NET: Registered protocol family 31 > > > > Bluetooth: HCI device and connection manager initialized > > > > Bluetooth: HCI socket layer initialized > > > > Bluetooth: L2CAP ver 2.8 > > > > Bluetooth: L2CAP socket layer initialized > > > > Bluetooth: HIDP (Human Interface Emulation) ver 1.1 > > > > eth0: no IPv6 routers present > > > > ivtv1-fb: === Validated display mode === > > > > ivtv1-fb: Display size 640x400 (640x400 Virtual) @ 8bpp > > > > ivtv1-fb: Display position 41,41 > > > > ivtv1-fb: Display filter : on > > > > ivtv1-fb: Color space : RGB > > > > ivtv1-fb: === Display mode change === > > > > ivtv1-fb: Display size 640x400 (640x400 Virtual) @ 8bpp > > > > ivtv1-fb: Display position 41,41 > > > > ivtv1-fb: Display filter : on > > > > ivtv1-fb: Color space : RGB > > > > ivtv1-fb: === Validated display mode === > > > > ivtv1-fb: Display size 640x400 (640x400 Virtual) @ 8bpp > > > > ivtv1-fb: Display position 41,41 > > > > ivtv1-fb: Display filter : on > > > > ivtv1-fb: Color space : RGB > > > > ivtv1-fb: === Display mode change === > > > > ivtv1-fb: Display size 640x400 (640x400 Virtual) @ 8bpp > > > > ivtv1-fb: Display position 41,41 > > > > ivtv1-fb: Display filter : on > > > > ivtv1-fb: Color space : RGB > > > > ivtv1-fb: === Validated display mode === > > > > ivtv1-fb: Display size 720x480 (720x480 Virtual) @ 32bpp > > > > ivtv1-fb: Display position 1,1 > > > > ivtv1-fb: Display filter : on > > > > ivtv1-fb: Color space : RGB > > > > ivtv1-fb: === Validated display mode === > > > > ivtv1-fb: Display size 720x480 (720x480 Virtual) @ 32bpp > > > > ivtv1-fb: Display position 1,1 > > > > ivtv1-fb: Display filter : on > > > > ivtv1-fb: Color space : RGB > > > > ivtv1-fb: === Display mode change === > > > > ivtv1-fb: Display size 720x480 (720x480 Virtual) @ 32bpp > > > > ivtv1-fb: Display position 1,1 > > > > ivtv1-fb: Display filter : on > > > > ivtv1-fb: Color space : RGB > > > > ivtv1 warning: Enable video output > > > > ivtv1 warning: Need to adjust to width 720 src_w 720 dst_w 638 src_x 0 > > > > dst_x 40 > > > > ivtv1 warning: Need to adjust to height 480 src_h 480 dst_h 460 src_y 0 > > > > dst_y 10 > > > > ivtv1 warning: Source video: Interlaced > > > > ivtv1 warning: Enable video output > > > > ivtv1 warning: Need to adjust to width 720 src_w 720 dst_w 638 src_x 0 > > > > dst_x 40 > > > > ivtv1 warning: Need to adjust to height 480 src_h 480 dst_h 460 src_y 0 > > > > dst_y 10 > > > > ivtv1 warning: Source video: Interlaced > > > > ivtv1 warning: Enable video output > > > > ivtv1 warning: Need to adjust to width 720 src_w 720 dst_w 638 src_x 0 > > > > dst_x 40 > > > > ivtv1 warning: Need to adjust to height 480 src_h 480 dst_h 460 src_y 0 > > > > dst_y 10 > > > > ivtv1 warning: Source video: Interlaced > > > > ivtv1 warning: CX2341X_ENC_SET_VBI_LINE took 189 jiffies (1000 per HZ) > > > > ivtv1 warning: Enable video output > > > > ivtv1 warning: Need to adjust to width 480 src_w 480 dst_w 638 src_x 0 > > > > dst_x 40 > > > > ivtv1 warning: Need to adjust to height 480 src_h 480 dst_h 460 src_y 0 > > > > dst_y 10 > > > > ivtv1 warning: Source video: Interlaced > > > > > > > > I'm sure someone with a keener eye than mine who knows what they are > > > > looking for can spot my problem. Thanks in advance for any insights. > > > > > > > > Cheers, > > > > Rod > > > > > > > > _______________________________________________ > > > > ivtv-users mailing list > > > > [email protected] > > > > http://ivtvdriver.org/mailman/listinfo/ivtv-users > > > > > > > > > _______________________________________________ > > > ivtv-users mailing list > > > [email protected] > > > http://ivtvdriver.org/mailman/listinfo/ivtv-users > > > > _______________________________________________ > > ivtv-users mailing list > > [email protected] > > http://ivtvdriver.org/mailman/listinfo/ivtv-users > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
