I recently updated my machine from Ubuntu 6.10 to 7.04. With 7.04, Ubuntu is shipping ivtv. Prior to that, I had to build it myself.
Since the upgrade, ivtv does not seem be full working. While the driver
loads without error (see the log below), and I can grab video
from /dev/video0 (which is nothing but static because there is no
input), I cannot seem to get ivtvctl to work properly.
I have a VCR connected to the device, so in order to access the
composite inputs, I need to run:
$ ivtvctrl -p 1
Unfortunately, this just tells me:
not an ivtv driver device
ivtv-detect reports:
driver: ivtv-0.10.1
card: Hauppauge WinTV PVR-150, bus info 0000:02:02.0
/dev/video32: YUV encoding
/dev/vbi0: VBI encoding
Any ideas?
Thanks,
Don
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.10.1 (tagged release) loading
ivtv: Linux version: 2.6.20-15-386 mod_unload 486
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 17 (level, low) -> IRQ 22
ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
tveeprom 0-0050: Hauppauge model 26582, rev C699, serial# 8450455
tveeprom 0-0050: tuner model is TCL 2002N 5H (idx 99, type 50)
tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 0-0050: audio processor is CX25843 (idx 37)
tveeprom 0-0050: decoder processor is CX25843 (idx 30)
tveeprom 0-0050: has no radio, has no IR receiver, has no IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-150
ivtv0: Registered device video0 for encoder MPEG (4 MB)
ivtv0: Registered device video32 for encoder YUV (2 MB)
ivtv0: Registered device vbi0 for encoder VBI (1 MB)
ivtv0: Registered device video24 for encoder PCM audio (1 MB)
ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
ivtv: ==================== END INIT IVTV ====================
signature.asc
Description: This is a digitally signed message part
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
