Hans Verkuil wrote: > Hi all, > > The new ivtv-0.10.2 driver for kernels 2.6.18-2.6.21 is now available > here: > > http://dl.ivtvdriver.org/ivtv/archive/0.10.x/ivtv-0.10.2.tar.gz > > This is the ChangeLog: > > - Replace SA_* with IRQF_*. > - Add support for 2.6.21 kernels. > - Fix radio audio stuttering. > - Add autodetect for new PVR150 low-profile models. > - Fix audio volume problem on CX23416GYC-STVLP. > - First unregister driver, then free memory. Not the other way around. > - Modifies automatic mode selection for yuv playback. Behaviour is now > that source video with a vertical resolution below that of the > currently set broadcast mode will be treated as progressive. Video with > a vertical resolution greater or equal to the current broadcast mode > (up to 576 lines) will be treated as interlaced. > - Update the VIDIOC_INT_RESET define. > - VIDIOC_INT_RESET changed starting 2.6.19, so check kernel version for > correct VIDIOC_INT_RESET define. > > If you are using kernel 2.6.20 or kernel 2.6.20.1 then you should > upgrade to a newer 2.6.20.x kernel: these two kernels have a bug that > makes it impossible to load the cx25840 firmware. This was fixed in > kernel 2.6.20.2. > > Enjoy, > > Hans > > Thanks for the new version! Any news on the PIO/IRQ issue? The system clock drift on my myth box is *very* bad right now, and I've read that that is a known issue with 0.10.x.
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
