On 5/19/07, Hans Verkuil <[EMAIL PROTECTED]> wrote:
> I would appreciate it if people could start testing the latest ivtv on
> the 0.10 branch, available here:


I have 3 PVR150s and it seems the latest ivtv driver craps out on the third
one.  At first, I thought I had a bad card or a bad slot on the motherboard,
but no matter which slots I put any of the cards into, I got the same errors
on the third card (no matter which card the third one was).  When I
downgraded to 0.7.4, all was fine again.

I saw a message on here a few days ago about a fellow who was getting the
same errors on his second card...

Here's the dmesg output for 0.10:

  70.347331] ivtv:  ==================== START INIT IVTV
====================
[   70.347335] ivtv:  version 1.0.0 (2.6.22-5-generic SMP mod_unload 586 )
loading
[   70.347412] ivtv0: Autodetected Hauppauge card (cx23416 based)
[   70.347451] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[   71.029978] ivtv0: loaded v4l-cx2341x-enc.fw firmware (4159345264 bytes)
[   71.244902] ivtv0: Encoder revision: 0x02060039
[   71.302599] ivtv0: Autodetected Hauppauge WinTV PVR-150
[   71.324754] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[   71.351637] cx25840 2-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0)
[   74.660030] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
[   75.015468] ivtv0: Registered device video0 for encoder MPEG (4 MB)
[   75.015700] ivtv0: Registered device video32 for encoder YUV (2 MB)
[   75.015945] ivtv0: Registered device vbi0 for encoder VBI (1 MB)
[   75.016116] ivtv0: Registered device video24 for encoder PCM audio (1 MB)
[   75.037467] ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
[   75.037531] ivtv:  ======================  NEXT CARD
======================
[   75.037534] ivtv1: Autodetected Hauppauge card (cx23416 based)
[   75.037786] ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
[   75.688897] ivtv1: loaded v4l-cx2341x-enc.fw firmware (4159346128 bytes)
[   75.900753] ivtv1: Encoder revision: 0x02060039
[   75.907859] tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1)
[   75.924346] cx25840 3-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #1)
[   79.194714] wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #1)
[   79.261046] ivtv1: Autodetected Hauppauge WinTV PVR-150
[   79.635393] ivtv1: Registered device video1 for encoder MPEG (4 MB)
[   79.635648] ivtv1: Registered device video33 for encoder YUV (2 MB)
[   79.635906] ivtv1: Registered device vbi1 for encoder VBI (1 MB)
[   79.636076] ivtv1: Registered device video25 for encoder PCM audio (1 MB)
[   79.657392] ivtv1: Initialized Hauppauge WinTV PVR-150, card #1
[   79.658500] ivtv:  ======================  NEXT CARD
======================
[   79.658506] ivtv2: Autodetected Hauppauge card (cx23416 based)
[   79.658742] ivtv2: Unreasonably low latency timer, setting to 64 (was 32)
[   80.303571] ivtv2: loaded v4l-cx2341x-enc.fw firmware (4159347184 bytes)
[   80.516665] ivtv2: Encoder revision: 0x02060039
[   80.552536] ivtv2: Invalid EEPROM
[   80.578359] ivtv2: i2c hardware 0x00000001 (cx2584x) not found for
command 0xc008561c!
[   80.578408] ivtv2: i2c addr 0x44 not found for command 0x4008646f!
[   80.578451] ivtv2: i2c hardware 0x00000020 (wm8775) not found for command
0x4008646d!
[   80.578495] ivtv2: i2c hardware 0x00000001 (cx2584x) not found for
command 0x4008646d!
[   80.684476] ivtv2: i2c hardware 0x00000001 (cx2584x) not found for
command 0xc008561c!
[   80.684522] ivtv2: i2c hardware 0x00000001 (cx2584x) not found for
command 0xc008561c!
[   80.792379] ivtv2: i2c hardware 0x00000001 (cx2584x) not found for
command 0xc008561c!
[   80.792658] ivtv2: Registered device video2 for encoder MPEG (4 MB)
[   80.792913] ivtv2: Registered device video34 for encoder YUV (2 MB)
[   80.793174] ivtv2: Registered device vbi2 for encoder VBI (1 MB)
[   80.793363] ivtv2: Registered device video26 for encoder PCM audio (1 MB)
[   80.793624] ivtv2: Registered device radio2 for encoder radio
[   80.793682] ivtv2: Initialized Hauppauge WinTV PVR-150, card #2
[   80.793700] ivtv:  ====================  END INIT IVTV
====================
[  114.287190] ivtv2: i2c hardware 0x00000001 (cx2584x) not found for
command 0xc008561c!
[  114.395127] ivtv2: i2c hardware 0x00000001 (cx2584x) not found for
command 0xc008561c!
[  149.649967] ivtv2: i2c addr 0x44 not found for command 0xc0cc5605!


For comparison, here are the same three cards with 0.7.4:

[17179587.380000] ivtv:  ==================== START INIT IVTV
====================
[17179587.380000] ivtv:  version 0.7.4 (tagged release) loading
[17179587.380000] ivtv:  Linux version: 2.6.17-11-generic SMP mod_unload 586
REGPARM gcc-4.1
[17179587.380000] ivtv:  In case of problems please include the debug info
between
[17179587.380000] ivtv:  the START INIT IVTV and END INIT IVTV lines, along
with
[17179587.380000] ivtv:  any module options, when mailing the ivtv-users
mailinglist.
[17179587.380000] ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416
based)
[17179587.380000] ivtv0: Unreasonably low latency timer, setting to 64 (was
32)
[17179587.544000] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[17179587.740000] cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver
#0)
[17179591.188000] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
[17179591.892000] ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
[17179592.108000] ivtv0: Encoder revision: 0x02060039
[17179592.108000] ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768
buffers (4096KB total)
[17179592.108000] ivtv0: Allocate DMA encoder YUV stream: 194 x 10800
buffers (2048KB total)
[17179592.112000] ivtv0: Allocate DMA encoder VBI stream: 120 x 17472
buffers (2048KB total)
[17179592.112000] ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608
buffers (2048KB total)
[17179592.212000] ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
[17179592.212000] ivtv:  ======================  NEXT CARD
======================
[17179592.212000] ivtv1: Autodetected Hauppauge WinTV PVR-150 card (cx23416
based)
[17179592.212000] ivtv1: Unreasonably low latency timer, setting to 64 (was
32)
[17179592.260000] tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1)
[17179592.420000] cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver
#1)
[17179595.436000] wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #1)
[17179596.208000] ivtv1: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
[17179596.424000] ivtv1: Encoder revision: 0x02060039
[17179596.424000] ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768
buffers (4096KB total)
[17179596.428000] ivtv1: Allocate DMA encoder YUV stream: 194 x 10800
buffers (2048KB total)
[17179596.428000] ivtv1: Allocate DMA encoder VBI stream: 120 x 17472
buffers (2048KB total)
[17179596.428000] ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608
buffers (2048KB total)
[17179596.528000] ivtv1: Initialized Hauppauge WinTV PVR-150, card #1
[17179596.528000] ivtv:  ======================  NEXT CARD
======================
[17179596.528000] ivtv2: Autodetected Hauppauge WinTV PVR-150 card (cx23416
based)
[17179596.528000] ivtv2: Unreasonably low latency timer, setting to 64 (was
32)
[17179597.212000] tuner 4-0061: chip found @ 0xc2 (ivtv i2c driver #2)
[17179599.532000] cx25840 4-0044: cx25843-23 found @ 0x88 (ivtv i2c driver
#2)
[17179642.392000] wm8775 4-001b: chip found @ 0x36 (ivtv i2c driver #2)
[17179644.084000] ivtv2: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
[17179644.300000] ivtv2: Encoder revision: 0x02060039
[17179644.300000] ivtv2: Allocate DMA encoder MPEG stream: 128 x 32768
buffers (4096KB total)
[17179644.300000] ivtv2: Allocate DMA encoder YUV stream: 194 x 10800
buffers (2048KB total)
[17179644.300000] ivtv2: Allocate DMA encoder VBI stream: 120 x 17472
buffers (2048KB total)
[17179644.300000] ivtv2: Allocate DMA encoder PCM audio stream: 455 x 4608
buffers (2048KB total)
[17179645.756000] ivtv2: Initialized Hauppauge WinTV PVR-150, card #2
[17179645.756000] ivtv:  ====================  END INIT IVTV
====================

Granted, this is under an older kernel (2.6.17-11), but I had the same
problem with .10.1 and .10.2 under 2.6.20-15 and 2.6.21.1.
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to