Hi, when recordings with one of my Hauppauge Cards (PVR 150 or PVR 350) I get tons of messages like
ivtv0 warning: encoder VBI: Couldn't find start of buffer within the first 256 bytes The topic came up before on this list, but I didn't find any solution. Any ideas? -- Dr. Johannes Zellner <[EMAIL PROTECTED]> ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.10.2 (tagged release) loading ivtv: Linux version: 2.6.21.1 SMP mod_unload ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23415 based) ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 22 (level, low) -> IRQ 22 input: PS2++ Logitech MX Mouse as /class/input/input2 ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02060039 ivtv0: Decoder revision: 0x02020023 tveeprom 0-0050: Hauppauge model 48134, rev J321, serial# 7196521 tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5) tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04) tveeprom 0-0050: audio processor is MSP4418 (idx 25) tveeprom 0-0050: decoder processor is SAA7115 (idx 19) tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter ivtv0: Autodetected Hauppauge WinTV PVR-350 tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0) msp3400 0-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0) msp3400 0-0040: MSP4418G-A2 supports nicam and radio, mode is autodetect and autoselect ivtv0: Registered device video0 for encoder MPEG (4 MB) ivtv0: Registered device video32 for encoder YUV (2 MB) ivtv0: Registered device vbi0 for encoder VBI (1 MB) ivtv0: Registered device video24 for encoder PCM audio (1 MB) ivtv0: Registered device radio0 for encoder radio ivtv0: Registered device video16 for decoder MPEG (1 MB) ivtv0: Registered device vbi8 for decoder VBI (1 MB) ivtv0: Registered device vbi16 for decoder VOUT ivtv0: Registered device video48 for decoder YUV (1 MB) ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) tuner 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 23 (level, low) -> IRQ 23 ivtv1: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv1: Encoder revision: 0x02060039 tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #1) tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1) tveeprom 1-0050: Hauppauge model 26559, rev C260, serial# 7736585 tveeprom 1-0050: tuner model is LG S001D MK3 (idx 60, type 38) tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 1-0050: audio processor is CX25843 (idx 37) tveeprom 1-0050: decoder processor is CX25843 (idx 30) tveeprom 1-0050: has radio, has no IR receiver, has no IR transmitter ivtv1: Autodetected Hauppauge WinTV PVR-150 cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1) ivtv1: Registered device video1 for encoder MPEG (4 MB) ivtv1: Registered device video33 for encoder YUV (2 MB) ivtv1: Registered device vbi1 for encoder VBI (1 MB) ivtv1: Registered device video25 for encoder PCM audio (1 MB) ivtv1: Registered device radio1 for encoder radio tuner 1-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) ivtv1: Initialized Hauppauge WinTV PVR-150, card #1 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
