hi i just installed ivtv-0.10.3 on rhel4.4, using vanilla 2.6.19.1 smp (pentium4 ht), using pvr-350.
here is my dmesg: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.10.3 (tagged release) loading ivtv: Linux version: 2.6.19.1 SMP mod_unload PENTIUMIII REGPARM ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23415 based) ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 22 (level, low) -> IRQ 23 ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02060039 ivtv0: Decoder revision: 0x02020023 ivtv0: Failed to load module tveeprom tveeprom 2-0050: Hauppauge model 48139, rev K257, serial# 7596263 tveeprom 2-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38) tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x tveeprom 2-0050: audio processor is MSP4418 (idx 25) tveeprom 2-0050: decoder processor is SAA7115 (idx 19) tveeprom 2-0050: has radio, has IR remote ivtv0: Autodetected Hauppauge WinTV PVR-350 ivtv0: Failed to load module tuner ivtv0: Failed to load module saa7115 ivtv0: Failed to load module saa7127 ivtv0: Failed to load module msp3400 ivtv0: Registered device video0 for encoder MPEG (4 MB) ivtv0: Registered device video32 for encoder YUV (2 MB) ivtv0: Registered device vbi0 for encoder VBI (1 MB) ivtv0: Registered device video24 for encoder PCM audio (1 MB) ivtv0: Registered device radio0 for encoder radio ivtv0: Registered device video16 for decoder MPEG (1 MB) ivtv0: Registered device vbi8 for decoder VBI (1 MB) ivtv0: Registered device vbi16 for decoder VOUT ivtv0: Registered device video48 for decoder YUV (1 MB) ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) ivtv0: i2c hardware 0x00000008 (msp3400) not found for command 0xc008561c! ivtv0: i2c addr 0x21 not found for command 0x4008646f! ivtv0: i2c hardware 0x00000008 (msp3400) not found for command 0x4008646d! ivtv0: i2c hardware 0x00000008 (msp3400) not found for command 0xc008561c! ivtv0: i2c hardware 0x00000008 (msp3400) not found for command 0xc008561c! ivtv0: i2c hardware 0x00000008 (msp3400) not found for command 0xc008561c! ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 ivtv: ==================== END INIT IVTV ==================== 1. it says: "Failed to load module tveeprom", but it does load it. 2. it says: ivtv0: Failed to load module tuner ivtv0: Failed to load module saa7115 ivtv0: Failed to load module saa7127 ivtv0: Failed to load module msp3400 however, if i modprobe them by hand, it works, so i can not figure out why it doesn't even if i manually modprobe all modules before modprobing ivtv, i still do not have sound, and i the insmoded msp3400 is unused. can anyone help ? thanks, erez.
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
