Hi,
I have an Adaptec avc-2010 (Video Oh! -pci card) set up using Zenwalk 4.6.1
with 2.6.21.3 SMP kernel with ivtv 0.10.3 and v4l-cx2341x-dec.fw,
v4l-cx2341x-enc.fw firmware files (orginal from the ivtv page). I try to
capture video film from video cassette recorder (VHS) by composite cable. I set
composite "input" card from command line. Everything seems to be right (dmesgg
output, lspci etc. are enclosed) apart from working. "cat /dev/video0 >
out.mpg" produce blank file without any sound ! The same with "cat /dev/video0
| gxine stdin:/" command. Output from the "mplayer /dev/video0" got this:
MPlayer 1.0rc1-4.1.2 (C) 2000-2006 MPlayer Team
CPU: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz (Family: 6, Model: 15, Stepping: 6)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
Playing /dev/video0.
Win32 LoadLibrary failed to load: avisynth.dll, /usr/lib/codecs/avisynth.dll,
/usr/lib/win32/avisynth.dll, /usr/local/lib/win32/avisynth.dll
MPEG-PS file format detected.
VIDEO: MPEG2 720x576 (aspect 2) 25.000 fps 8000.0 kbps (1000.0 kbyte/s)
==========================================================================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 720 x 576 (preferred colorspace: Mpeg PES)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
Try adding the scale filter, e.g. -vf spp,scale instead of -vf spp.
VDecoder init failed :(
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.4.0b
Selected video codec: [mpeg12] vfm: libmpeg2 (MPEG-1 or 2 (libmpeg2))
==========================================================================
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 48000 Hz, 2 ch, s16le, 224.0 kbit/14.58% (ratio: 28000->192000)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
AO: [oss] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
VDec: vo config request - 720 x 576 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
VO: [xv] 720x576 => 768x576 Planar YV12
I have no conception what have to be made against producing/playing blank file.
Below I enclose lspci and dmesg output. This problem seems to me very freaky!
lspci:
06:06.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416)
MPEG-2 Encoder (rev 01)
Subsystem: Adaptec VideOh! AVC-2010
Flags: bus master, medium devsel, latency 128, IRQ 20
Memory at f4000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
dmesg:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.10.3 (tagged release) loading
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 17, io base 0x0000fb00
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ivtv: Linux version: 2.6.21.3 SMP preempt mod_unload 486
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
hub 3-0:1.0: over-current change on port 6
r8169 Gigabit Ethernet driver 2.2LK loaded
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.0 to 64
eth0: RTL8168b/8111b at 0xf887e000, 00:50:8d:9c:a9:47, IRQ 17
r8169 Gigabit Ethernet driver 2.2LK loaded
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:04:00.0 to 64
eth1: RTL8168b/8111b at 0xf9176000, 00:50:8d:9c:a9:48, IRQ 16
ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:06:05.0 to 64
Audigy2 value: Special config.
ivtv0: Autodetected Adaptec VideOh! AVC-2010 card (cx23416 based)
ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 23 (level, low) -> IRQ 20
usb 5-1: new low speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb-0000:00:1d.0-1
hub 7-0:1.0: over-current change on port 1
hub 7-0:1.0: over-current change on port 2
ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
ivtv0: Failed to load module cs53l32a
ivtv0: Registered device video0 for encoder MPEG (4 MB)
ivtv0: Registered device video32 for encoder YUV (2 MB)
ivtv0: Registered device vbi0 for encoder VBI (1 MB)
ivtv0: Registered device video24 for encoder PCM audio (1 MB)
ivtv0: i2c hardware 0x00000040 (cs53l32a) not found for command 0xc008561c!
ivtv0: i2c hardware 0x00000040 (cs53l32a) not found for command 0x4008646d!
ivtv0: i2c hardware 0x00000040 (cs53l32a) not found for command 0xc008561c!
ivtv0: i2c hardware 0x00000040 (cs53l32a) not found for command 0xc008561c!
ivtv0: i2c hardware 0x00000040 (cs53l32a) not found for command 0xc008561c!
ivtv0: Initialized Adaptec VideOh! AVC-2010, card #0
ivtv: ==================== END INIT IVTV ====================
Many thanks,
Peter
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
