I am trying to set up ivtv on a new box. I am using a PVR-350 on Mandriva 2007 64 bit. ivtv seems to be set up correctly, but I get unable to view the test file using mplayer. I have attached the output of my dmesg pertinent to ivtv below. Also note that I can do
cat /dev/video0 > test.mpg but when I try to use mplayer to review the file I get [EMAIL PROTECTED] utils]# cat /dev/video0 > test.mpg [EMAIL PROTECTED] utils]# /usr/bin/mplayer test.mpg MPlayer 1.0pre8-4.1.1 (C) 2000-2006 MPlayer Team CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ (Family: 15, Model: 75, Stepping: 2) CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1 Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2 93 audio & 211 video codecs Opening joystick device /dev/input/js0 Can't open joystick device /dev/input/js0: No such file or directory Can't init input joystick Setting up LIRC support... Playing test.mpg. Seek failed Exiting... (End of file) Does someone have any theories? ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.7.4 (tagged release) loading ivtv: Linux version: 2.6.17-5mdv SMP mod_unload gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based) ivtv0: Unreasonably low latency timer, setting to 64 (was 32) tveeprom 0-0050: Hauppauge model 48132, rev K268, serial# 9921474 tveeprom 0-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 0-0050: audio processor is MSP4448 (idx 27) tveeprom 0-0050: decoder processor is SAA7115 (idx 19) tveeprom 0-0050: has radio, has IR remote tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) tda9887 0-0043: chip found @ 0x86 (ivtv i2c driver #0) saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) msp3400 0-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0) msp3400 0-0040: MSP4448G-A2 supports radio, mode is autodetect and autoselect ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02060039 ivtv0: Decoder revision: 0x02020023 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Create encoder radio stream ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) ivtv0: Create decoder VOUT stream ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB total) ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) tuner 0-0061: type set to 47 (LG NTSC (TAPE series)) ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
