Hi,

I can't seem to get ptune.pl to work. Am I doing anything wrong?

This works:
        # ivtv-tune -f 210.250
But this does not
        # ptune.pl --frequency 210250

(ptune.pl does mention a frequency of 517250 so the missing-comma-format
should be right)

Alternating between frequencies of 210.250 and 211.250 I can see the
ivtv-tune *does* change the channel, while ptune.pl does not. I can find
no errors on STDOUT in dmesg or in any log files. I also tried
combinations of supplying a channel and frequency table with same results.

This post: http://www.gossamer-threads.com/lists/ivtv/users/33841 from
Jan 7, 2007 mentions a similar problem.

If this can be confirmed, then I suggest mentioning this on the wiki.
Could've saved me a few hours today! :D

Peter

******** DETAILS ***********

I've tried both  ubuntu's packages for Video::ivtv and ivtv-utils and
installing Video::ivtv 0.13 from
http://www.pcxperience.org/james/ivtv/video-ivtv/Video-ivtv-0.13.tar.gz
and ivtv-utils from
http://dl.ivtvdriver.org/ivtv/archive/0.10.x/ivtv-0.10.3.tar.gz
and recompiling them myself with the same results.

OS: Ubuntu Feisty
(Downloaded and installed ivtv-firmware 0.20070217 from
http://dl.ivtvdriver.org/ubuntu)

Stock ubuntu kernel:
$ uname -a
Linux myth 2.6.20-16-generic #2 SMP Thu Jun 7 20:19:32 UTC 2007 i686
GNU/Linux

dmesg output attached.

--
Peter Valdemar Mørch
http://www.morch.com
[   17.915420] ivtv:  ==================== START INIT IVTV ====================
[   17.915422] ivtv:  version 0.10.1 (tagged release) loading
[   17.915424] ivtv:  Linux version: 2.6.20-16-generic SMP mod_unload 586 
[   17.915426] ivtv:  In case of problems please include the debug info between
[   17.915427] ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
[   17.915429] ivtv:  any module options, when mailing the ivtv-users 
mailinglist.
[   17.915480] ivtv0: Autodetected Hauppauge card (cx23415 based)
[   17.918371] ACPI: PCI Interrupt 0000:05:05.0[A] -> GSI 21 (level, low) -> 
IRQ 18
[   18.021257] nvidia: module license 'NVIDIA' taints kernel.
[   18.595723] ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
[   18.613545] ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
[   18.834802] ivtv0: Encoder revision: 0x02060039
[   18.842890] ivtv0: Decoder revision: 0x02020023
[   18.909112] tveeprom 0-0050: Hauppauge model 48134, rev I121, serial# 6189642
[   18.909115] tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5)
[   18.909117] tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
[   18.909119] tveeprom 0-0050: audio processor is MSP4418 (idx 25)
[   18.909121] tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
[   18.909122] tveeprom 0-0050: has radio, has IR receiver, has no IR 
transmitter
[   18.909125] ivtv0: Autodetected Hauppauge WinTV PVR-350
[   18.927715] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[   18.997996] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c 
driver #0)
[   19.237947] saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
[   19.266955] msp3400 0-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
[   19.266957] msp3400 0-0040: MSP4418G-A2 supports nicam and radio, mode is 
autodetect and autoselect
[   19.267076] ivtv0: Registered device video0 for encoder MPEG (4 MB)
[   19.267198] ivtv0: Registered device video32 for encoder YUV (2 MB)
[   19.267326] ivtv0: Registered device vbi0 for encoder VBI (1 MB)
[   19.267372] ivtv0: Registered device video24 for encoder PCM audio (1 MB)
[   19.267536] ivtv0: Registered device radio0 for encoder radio
[   19.267549] ivtv0: Registered device video16 for decoder MPEG (1 MB)
[   19.267581] ivtv0: Registered device vbi8 for decoder VBI (1 MB)
[   19.267859] ivtv0: Registered device vbi16 for decoder VOUT
[   19.267874] ivtv0: Registered device video48 for decoder YUV (1 MB)
[   19.346492] ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
[   19.456088] tuner 0-0061: type set to 5 (Philips PAL_BG (FI1216 and 
compatibles))
[   19.838084] ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
[   19.838093] ivtv:  ====================  END INIT IVTV  ====================

_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to