Hello all, I need a hand here, I googled for hours with no luck.
some background info:
Dist: Gentoo
Kernel: 2.6.21
IVTV: 0.10.3
mediabox ~ # dmesg | grep ivtv
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.10.3 (tagged release) loading
ivtv: Linux version: 2.6.21-gentoo-r4 SMP mod_unload PENTIUM4
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge card (cx23415 based)
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02060039
ivtv0: Decoder revision: 0x02020023
ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-0/0-0018/ir0 [ivtv i2c driver #0]
saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
msp3400 0-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0)
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
ivtv0: Autodetected Hauppauge WinTV PVR-350
ivtv0: Registered device video0 for encoder MPEG (4 MB)
ivtv0: Registered device video32 for encoder YUV (2 MB)
ivtv0: Registered device vbi0 for encoder VBI (1 MB)
ivtv0: Registered device video24 for encoder PCM audio (1 MB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Registered device video16 for decoder MPEG (1 MB)
ivtv0: Registered device vbi8 for decoder VBI (1 MB)
ivtv0: Registered device vbi16 for decoder VOUT
ivtv0: Registered device video48 for decoder YUV (1 MB)
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
ivtv: ==================== END INIT IVTV ====================
ivtv0-fb: Framebuffer at 0xf5510000, mapped to 0xf9710000, size 1665k
compiled mplayer with IVTV support.
mediabox ~ # mplayer -vo ivtv test.mpg
then I can see the movie perfectly playing but *Behind the Console* :(
mediabox ~ # ivtvfbctl --device=/dev/fb0 --globalalpha=off --localalpha=off
--alpha=0
Framebuffer state:
Global alpha: ENABLED
Local alpha: ENABLED
Global alpha value: 255
Framebuffer state:
Global alpha: disabled
Local alpha: disabled
Global alpha value: 0
but the console is still in the middle of my screen :(
Tried many combinations of global an local alpha , but nothing ...
then I tried:
mediabox~ # setterm -blank 1 -powersave on
wait for a minute (don't know how to blank immediately) and WOW the console
goes away, BUT ... thats not the solution ....
Why is ivtvfbctl ignorig me ...
I am sure this is very simple, I am just missing something ..
Thank you for any help ...
m.
____________________________________________________________________________________
Get the Yahoo! toolbar and be alerted to new email wherever you're surfing.
http://new.toolbar.yahoo.com/toolbar/features/mail/index.php_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
