Hi all,
In an effort to get my PVR-350 working on my fedora 7 box, I updated the
kernel and ivtv packages to 2.6.22.
The PVR-350 card and framebuffer driver load OK and the image on TV
looks good. There is no ivtv X driver for fedora 7, so I use the one
from fc6. This used to work good up to 2.6.21 with the same xorg.conf.
But now when I start X, it doesn't start, but gives an error.
Has something (ie ivtv-fb) changed that the X driver doesn't work anymore?
Jurgen.
================
Output of X:
[EMAIL PROTECTED] ~]# X
X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: Fedora Core 7 Red Hat, Inc.
Current Operating System: Linux albatros.xs4all.nl 2.6.22.1-41.fc7 #1
SMP Fri Jul 27 18:10:34 EDT 2007 i686
Build Date: 11 June 2007
Build ID: xorg-x11-server 1.3.0.0-9.fc7
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 2 22:01:54 2007
(==) Using config file: "/etc/X11/xorg.conf"
(EE) ivtvHWProvbe failed to do IVTVFB_IOCTL_GET_STATE for device /dev/fb1
(EE) Screen 0 deleted because of no matching config section.
(EE) Device(s) detected, but none match those in the config file.
Fatal server error:
no screens found
==========
I have loaded the ivtv-fb module with debug=3. I see in the syslog:
ivtv-fb0 info: Unknown ioctl 80084001
==========
installed packages:
kernel-2.6.22.1-41.fc7
video4linux-kmdl-2.6.22.1-41.fc7-20070731-81.fc7
video4linux-ivtv-kmdl-2.6.22.1-41.fc7-20070731-81.fc7
ivtv_xdriver-0.10.7-8_r3843.fc6.at
================
Output from /proc/fb:
[EMAIL PROTECTED] ~]# cat /proc/fb
0 VESA VGA
1 cx23415 TV out
================
xorg.conf [device] section:
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "Default Layout"
Screen "TV" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name
of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "PAL Monitor"
HorizSync 30-68
VertRefresh 50-120
Mode "720x576"
DotClock 42.6
HTimings 720 760 832 944
VTimings 576 577 580 602
Flags "-HSync" "-VSync"
EndMode
EndSection
Section "Device"
Identifier "Hauppauge PVR 350 iTVC15 Framebuffer"
Driver "ivtvdev"
Option "fbdev" "/dev/fb1"
# Option "VideoOverlay" "on"
# Option "XVideo" "1"
BusID "PCI:05:03"
EndSection
Section "Screen"
Identifier "TV"
Device "Hauppauge PVR 350 iTVC15 Framebuffer"
# Monitor "NTSC Monitor"
Monitor "PAL Monitor"
DefaultDepth 24
DefaultFbbpp 32
Subsection "Display"
Depth 24
FbBpp 32
# Modes "720x480"
Modes "720x576"
EndSubsection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
=========
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
