I have a system running Ubuntu 7.04 with a 2.6.20-16 kernel on a AMD X2 64 bit
processor. In this system I have both a PVR-500 and a PVR-350 installed. What
I'd like to do is utilize the PVR-350's SVideo or even composite out.
The problem that I have is that I can't seem to get ivtv to initialize the
PVR-350 card if I plug in the output breakout cable into the PVR-350. If I
leave the breakout cable unpluged and boot, the card is discovered and all is
good. Of course, I can't use the TV-Out without the breakout cable...
I thought that perhaps the PVR-350 maintained the config set with power applied
to the card, but I've tried completely removing the power before plugging in
the breakout cable and restarting with no luck.
Would gladly trade beer if someone can tell me what I can do to get this
working...
Relevant dmesg output below:
<===== Without the breakout cable plugged in =====>
Aug 3 01:14:07 mythtv kernel: [ 40.431182] ivtv: ====================
START INIT IVTV ====================
Aug 3 01:14:07 mythtv kernel: [ 40.431185] ivtv: version 0.10.1 (tagged
release) loading
Aug 3 01:14:07 mythtv kernel: [ 40.431187] ivtv: Linux version:
2.6.20-16-generic SMP mod_unload
Aug 3 01:14:07 mythtv kernel: [ 40.431188] ivtv: In case of problems please
include the debug info between
Aug 3 01:14:07 mythtv kernel: [ 40.431189] ivtv: the START INIT IVTV and
END INIT IVTV lines, along with
Aug 3 01:14:07 mythtv kernel: [ 40.431191] ivtv: any module options, when
mailing the ivtv-users mailinglist.
Aug 3 01:14:07 mythtv kernel: [ 40.431261] ivtv0: Autodetected Hauppauge
card (cx23415 based)
Aug 3 01:14:07 mythtv kernel: [ 40.433700] ACPI: PCI Interrupt Link [APC3]
enabled at IRQ 18
Aug 3 01:14:07 mythtv kernel: [ 40.433708] ACPI: PCI Interrupt
0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
Aug 3 01:14:07 mythtv kernel: [ 40.533327] ACPI: PCI Interrupt Link [AAZA]
enabled at IRQ 20
Aug 3 01:14:07 mythtv kernel: [ 40.533331] ACPI: PCI Interrupt
0000:00:07.0[A] -> Link [AAZA] -> GSI 20 (level, low) -> IRQ 20
Aug 3 01:14:07 mythtv kernel: [ 40.646969] usb 1-1: reset full speed USB
device using ohci_hcd and address 3
Aug 3 01:14:07 mythtv kernel: [ 40.738762] hda_codec: Unknown model for
ALC883, trying auto-probe from BIOS...
Aug 3 01:14:07 mythtv kernel: [ 40.852690] lirc_dev: lirc_register_plugin:
sample_rate: 0
Aug 3 01:14:07 mythtv kernel: [ 40.852931] input: ImExPS/2 Logitech Explorer
Mouse as /class/input/input3
Aug 3 01:14:07 mythtv kernel: [ 40.858548] lirc_mceusb2[3]: SMK eHome
Infrared Transceiver on usb1:3
Aug 3 01:14:07 mythtv kernel: [ 40.858568] usbcore: registered new interface
driver lirc_mceusb2
Aug 3 01:14:07 mythtv kernel: [ 41.123141] ivtv0: loaded v4l-cx2341x-enc.fw
firmware (262144 bytes)
Aug 3 01:14:07 mythtv kernel: [ 41.160988] ivtv0: loaded v4l-cx2341x-dec.fw
firmware (262144 bytes)
Aug 3 01:14:07 mythtv kernel: [ 41.381516] ivtv0: Encoder revision:
0x02050032
Aug 3 01:14:07 mythtv kernel: [ 41.381518] ivtv0: Recommended firmware
version is 0x02060039.
Aug 3 01:14:07 mythtv kernel: [ 41.389517] ivtv0: Decoder revision:
0x02020023
Aug 3 01:14:07 mythtv kernel: [ 41.450152] tveeprom 0-0050: Hauppauge model
48132, rev K268, serial# 8050952
Aug 3 01:14:07 mythtv kernel: [ 41.450155] tveeprom 0-0050: tuner model is
LG TAPE H001F MK3 (idx 68, type 47)
Aug 3 01:14:07 mythtv kernel: [ 41.450157] tveeprom 0-0050: TV standards
NTSC(M) (eeprom 0x08)
Aug 3 01:14:07 mythtv kernel: [ 41.450159] tveeprom 0-0050: audio processor
is MSP4448 (idx 27)
Aug 3 01:14:07 mythtv kernel: [ 41.450161] tveeprom 0-0050: decoder
processor is SAA7115 (idx 19)
Aug 3 01:14:07 mythtv kernel: [ 41.450162] tveeprom 0-0050: has radio, has
IR receiver, has no IR transmitter
Aug 3 01:14:07 mythtv kernel: [ 41.450165] ivtv0: Autodetected Hauppauge
WinTV PVR-350
Aug 3 01:14:07 mythtv kernel: [ 41.470290] tuner 0-0043: chip found @ 0x86
(ivtv i2c driver #0)
Aug 3 01:14:07 mythtv kernel: [ 41.470313] tda9887 0-0043: tda988[5/6/7]
found @ 0x43 (tuner)
Aug 3 01:14:07 mythtv kernel: [ 41.474645] tuner 0-0061: chip found @ 0xc2
(ivtv i2c driver #0)
Aug 3 01:14:07 mythtv kernel: [ 41.551583] saa7115 0-0021: saa7115 found
(1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
Aug 3 01:14:07 mythtv kernel: [ 41.780447] saa7127 0-0044: saa7129 found @
0x88 (ivtv i2c driver #0)
Aug 3 01:14:07 mythtv kernel: [ 41.802903] msp3400 0-0040: MSP4448G-A2 found
@ 0x80 (ivtv i2c driver #0)
Aug 3 01:14:07 mythtv kernel: [ 41.802905] msp3400 0-0040: MSP4448G-A2
supports radio, mode is autodetect and autoselect
Aug 3 01:14:07 mythtv kernel: [ 41.803133] ivtv0: Registered device video0
for encoder MPEG (4 MB)
Aug 3 01:14:07 mythtv kernel: [ 41.803336] ivtv0: Registered device video32
for encoder YUV (2 MB)
Aug 3 01:14:07 mythtv kernel: [ 41.803583] ivtv0: Registered device vbi0 for
encoder VBI (1 MB)
Aug 3 01:14:07 mythtv kernel: [ 41.803680] ivtv0: Registered device video24
for encoder PCM audio (1 MB)
Aug 3 01:14:07 mythtv kernel: [ 41.803956] ivtv0: Registered device radio0
for encoder radio
Aug 3 01:14:07 mythtv kernel: [ 41.803982] ivtv0: Registered device video16
for decoder MPEG (1 MB)
Aug 3 01:14:07 mythtv kernel: [ 41.804031] ivtv0: Registered device vbi8 for
decoder VBI (1 MB)
Aug 3 01:14:07 mythtv kernel: [ 41.804322] ivtv0: Registered device vbi16
for decoder VOUT
Aug 3 01:14:07 mythtv kernel: [ 41.804341] ivtv0: Registered device video48
for decoder YUV (1 MB)
Aug 3 01:14:07 mythtv kernel: [ 41.867437] ivtv0: loaded
v4l-cx2341x-init.mpg firmware (155648 bytes)
Aug 3 01:14:07 mythtv kernel: [ 41.972446] tuner 0-0061: type set to 47 (LG
NTSC (TAPE series))
Aug 3 01:14:07 mythtv kernel: [ 42.336691] ivtv0: Initialized Hauppauge
WinTV PVR-350, card #0
Aug 3 01:14:07 mythtv kernel: [ 42.336829] ivtv: ======================
NEXT CARD ======================
<===== Errors with the breakout cable plugged in =====>
[ 34.418583] ivtv: ==================== START INIT IVTV ====================
[ 34.418585] ivtv: version 0.10.1 (tagged release) loading
[ 34.418587] ivtv: Linux version: 2.6.20-16-generic SMP mod_unload
[ 34.418588] ivtv: In case of problems please include the debug info between
[ 34.418590] ivtv: the START INIT IVTV and END INIT IVTV lines, along with
[ 34.418591] ivtv: any module options, when mailing the ivtv-users
mailinglist.
[ 34.419190] ivtv0: Autodetected Hauppauge card (cx23415 based)
[ 34.420087] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 34.420096] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18
(level, low) -> IRQ 18
[ 34.558999] logips2pp: Detected unknown logitech mouse model 127
[ 34.683765] nvidia: module license 'NVIDIA' taints kernel.
[ 34.948763] sd 7:0:0:0: Attached scsi removable disk sda
[ 34.950745] sd 7:0:0:1: Attached scsi removable disk sdb
[ 34.953040] sd 7:0:0:2: Attached scsi removable disk sdc
[ 34.954738] sd 7:0:0:3: Attached scsi removable disk sdd
[ 34.956869] Bluetooth: Core ver 2.11
[ 34.956903] NET: Registered protocol family 31
[ 34.956904] Bluetooth: HCI device and connection manager initialized
[ 34.956906] Bluetooth: HCI socket layer initialized
[ 35.015195] NET: Registered protocol family 17
[ 35.016699] Bluetooth: HCI USB driver ver 2.9
[ 35.018558] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input3
[ 35.026679] lirc_dev: IR Remote Control driver registered, at major 61
[ 35.034186] lirc_mceusb2: no version for "lirc_get_pdata" found: kernel
tainted.
[ 35.034533]
[ 35.034534] lirc_mceusb2: Philips eHome USB IR Transciever and Microsoft MCE
2005 Remote Control driver for LIRC $Revision: 1.25 $
[ 35.034536] lirc_mceusb2: Daniel Melander <[EMAIL PROTECTED]>, Martin
Blatter <[EMAIL PROTECTED]>
[ 35.102830] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
[ 35.140396] ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
[ 35.154745] usbcore: registered new interface driver hci_usb
[ 35.372720] ivtv0 warning: Encoder mailbox not found
[ 35.372723] ivtv0: Retry loading firmware
[ 35.425113] usb 1-1: reset full speed USB device using ohci_hcd and address
3
[ 35.630790] lirc_dev: lirc_register_plugin: sample_rate: 0
[ 35.636651] lirc_mceusb2[3]: SMK eHome Infrared Transceiver on usb1:3
[ 35.636669] usbcore: registered new interface driver lirc_mceusb2
[ 35.997323] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
[ 36.011564] ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
[ 36.243077] ivtv0 warning: Encoder mailbox not found
[ 36.243078] ivtv0: Error initializing firmware
[ 36.243280] ivtv0: Error -19 on initialization
[ 36.243333] ivtv: ====================== NEXT CARD ======================
---------------------------------
Park yourself in front of a world of choices in alternative vehicles.
Visit the Yahoo! Auto Green Center._______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
