I just upgraded my kernel and tried what Rick said.  here is the issue now:

[EMAIL PROTECTED] ~]$ svn co http://ivtvdriver.org/svn/ivtv/branches/0.10/ ivtv
> A    ivtv/test
> ----CUT-------------
> Checked out revision 4002.
> [EMAIL PROTECTED] ~]$
> [EMAIL PROTECTED] ~]$ cd ivtv
> [EMAIL PROTECTED] ivtv]$ ls
> ChangeLog      COPYING  driver       Makefile  README          test
> v4l-cx2341x-init.mpg
> ChangeLog.old  doc      i2c-drivers  misc      README.v4l-dvb  utils
> [EMAIL PROTECTED] ivtv]$ make
> make -C driver all
> make[1]: Entering directory `/home/myth/ivtv/driver'
> created ivtv-svnversion.h
> make -C /lib/modules/2.6.22.1-32.fc6/build M=/home/myth/ivtv/driver
> modules
> make: Entering an unknown directory
> make: *** /lib/modules/2.6.22.1-32.fc6/build: No such file or directory.
> Stop.
> make: Leaving an unknown directory
> make[1]: *** [all] Error 2
> make[1]: Leaving directory `/home/myth/ivtv/driver'
> make: *** [all] Error 2
>
> [EMAIL PROTECTED] ivtv]$ uname -a
> Linux mythtv 2.6.22.1-32.fc6 #1 SMP Wed Aug 1 15:15:33 EDT 2007 i686 i686
> i386 GNU/Linux



Is this the same type of error?  How do i fix it?


Thanks,
Mitchell


On 8/17/07, Ricardo Lugo <[EMAIL PROTECTED]> wrote:
>
> \On Aug 16, 2007, at 8:21 PM, Mitch Gore wrote:
>
> I want to try and use the svn of ivtv too.  maybe there is a fix in there
> that will help.  i checked out the svn and did a make in the trunk folder
> and i get this error: <snip>
>
> /home/myth/ivtv/trunk/i2c-drivers/saa717x.c:1274: error: 'struct
> v4l2_register' has no member named 'match_chip'
>
>
> You need a more recent set of headers and more for V4L.
>
> Just use kernel 2.6.21.x and checkout the branches/0.10 - I believe its
> functionally similar to the trunk (they both have the recent DMA fix for
> example), and compiling isn't as difficult.
>
> As another data point, I find that the Anticipatory scheduler works well
> for me. Who knows? In addition, I enable full preempt.
>
> - Rick
>
> Whats the problem?
>
> Thanks
>
> On 8/16/07, Mitch Gore <[EMAIL PROTECTED]> wrote:
> >
> > im working right now on compiling mythtv on my desktop
> > i am going to try to put the pvr card in that and configure a remote
> > tuner.  see if that helps.  atleast then it will rule out a bad PVR.  I dont
> > really want to have to get a new MB and CPU :(  but hope is looking
> > bleak....
> >
> > thanks
> >
> > On 8/16/07, William Powers < [EMAIL PROTECTED]> wrote:
> > >
> > > Mitch Gore wrote:
> > > > Sorry for the mis information.  I was in a hurry I know is AMD ATI
> > > > now.  haha
> > > >
> > > > anyways back to my issue.
> > > >
> > > > here is the exact MB I have ECS 661FX-M7 (V1.1)
> > > > <http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?DetailID=476&CategoryID=1&DetailName=Feature&MenuID=44&LanID=9
> > > >
> > > > I tried trying the dd command again and i only recorded a few hours
> > > > before it froze.  I am running the lastest BIOS.
> > > >
> > > > I did some googleing and done see any posts about linux
> > > > compadibility.  Can you find anything?
> > > >
> > > > Thanks,
> > > > Mitchell
> > >
> > > I tried googling and all I found was some of your posts, so that's no
> > > help.  I guess you've been trying to fix this now for quite a while.
> > > If
> > > you've tried everything except replacing the motherboard and it still
> > > won't work I guess you're left with...replacing the motherboard.
> > >
> > > Good luck.
> > >
> > >
> > >
> > > _______________________________________________
> > > ivtv-users mailing list
> > > [email protected]
> > > http://ivtvdriver.org/mailman/listinfo/ivtv-users
> > >
> >
> >
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>
>
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to