On 9/29/07, Nate Iverson <[EMAIL PROTECTED]> wrote: > I went into bios and disabled the floppy controller, both serial ports, > and the parallel port -- as I don't use these. There wasn't a section to > manually reassign the interrupts. I decided to see if the shared > interrupt would change now that I freed up additional interrupts by > disabling the floppy controller, serial ports, and the parallel ports. > Now the system doesn't boot, not even a BIOS screen, just a quick num > lock/cap lock/scroll flash that used to signal the system was about to > boot. Crap, I will dig out the manual and find jumper to reset the bios > settings and try again > That is very weird. I have never seen that. Have you tried unplugging the pc for a few seconds and then plugging it back in.
John _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
