On wo, 2007-10-03 at 16:22 -0400, Eddie Davis wrote: > Please help me get this card to work with Ubuntu 7.04 > The computer is a hp m7590n > The card shows as Conexant Falcon II NTSC Video Capture and Internext > Compression Inc iTVC16
Can you try and play around with the cardtype module option? For example try cardtype=7 or cardtype=12. (see modinfo ivtv for a complete list). Greets Sander > [ 5132.891575] ivtv: ==================== START INIT IVTV > ==================== > [ 5132.891580] ivtv: version 0.10.1 (tagged release) loading > [ 5132.891582] ivtv: Linux version: 2.6.20-16-generic SMP mod_unload > 586 > [ 5132.891587] ivtv: In case of problems please include the debug info > between > [ 5132.891589] ivtv: the START INIT IVTV and END INIT IVTV lines, along > with > [ 5132.891591] ivtv: any module options, when mailing the ivtv-users > mailinglist. > [ 5132.891648] ivtv0: Unknown card: vendor/device: 4444/0016 > [ 5132.891653] ivtv0: subsystem vendor/device: 1043/4b66 > [ 5132.891657] ivtv0: cx23416 based > [ 5132.891659] ivtv0: Defaulting to Hauppauge WinTV PVR-150 card > [ 5132.891662] ivtv0: Please mail the vendor/device and subsystem > vendor/device IDs and what kind of > [ 5132.891666] ivtv0: card you have to the ivtv-devel mailinglist > (www.ivtvdriver.org) > [ 5132.891669] ivtv0: Prefix your subject line with [UNKNOWN CARD]. > [ 5132.893656] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, > low) -> IRQ 16 > [ 5133.542620] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > [ 5133.757010] ivtv0: Encoder revision: 0x02050032 > [ 5133.757016] ivtv0: Recommended firmware version is 0x02060039. > [ 5133.763058] tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) > [ 5133.763368] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) > [ 5133.768256] tuner 0-0060: All bytes are equal. It is not a TEA5767 > [ 5133.768261] tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0) > [ 5133.792212] cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver > #0) > [ 5138.662619] cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 > bytes) > [ 5138.774149] tveeprom 0-0050: Huh, no eeprom present (err=-121)? > [ 5138.774154] tveeprom 0-0050: Encountered bad packet header [02]. > Corrupt or not a Hauppauge eeprom. > [ 5138.774160] ivtv0: Invalid EEPROM > [ 5138.836317] ivtv0: Registered device video0 for encoder MPEG (4 MB) > [ 5138.836508] ivtv0: Registered device video32 for encoder YUV (2 MB) > [ 5138.836716] ivtv0: Registered device vbi0 for encoder VBI (1 MB) > [ 5138.836798] ivtv0: Registered device video24 for encoder PCM audio (1 > MB) > [ 5138.837029] ivtv0: Registered device radio0 for encoder radio > [ 5138.906822] ivtv0: i2c hardware 0x00000020 (wm8775) not found for > command 0x4008646d! > [ 5139.072820] tuner 0-0060: tuner type not set > [ 5139.107954] tuner 0-0060: tuner type not set > [ 5139.232542] ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 > [ 5139.232559] ivtv: ==================== END INIT IVTV > ==================== > > > > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
