Hello, Dual boot windows/linux The card is working on windows On linux, I cant make it work with xawtv & tvtime
Scantv : It says input = Television As values should be « Tuner 1 » Tvtime : Lit la configuration depuis /etc/tvtime/tvtime.xml Lit la configuration depuis /home/steph/.tvtime/tvtime.xml videoinput: Card failed to allocate capture buffers: Argument invalide XawTV : /dev/video0 [v4l2]: no overlay support v4l-conf had some trouble, trying to continue anyway Warning: Cannot convert string "-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" t e FontStruct no way to get: 384x288 32 bit TrueColor (LE: bgr-) fembar:~# cat /dev/video0 > test.mpg fembar:~# ls -l test.mpg -rw-r--r-- 1 root root 0 2007-11-27 19:09 test.mpg The file is empty Debian Etch kernel : 2.6.18 vtv: ==================== START INIT IVTV ==================== ivtv: version 0.10.6 (tagged release) loading ivtv: Linux version: 2.6.18-4-686 SMP mod_unload 686 REGPARM gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. Real Time Clock Driver v1.12ac ts: Compaq touchscreen protocol output input: ImPS/2 Generic Wheel Mouse as /class/input/input3 intel8x0_measure_ac97_clock: measured 55450 usecs intel8x0: clocking to 48000 ivtv0: Autodetected Hauppauge card (cx23415 based) ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 177 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02060039 ivtv0: Decoder revision: 0x02020023 tveeprom 1-0050: Hauppauge model 48139, rev K2B7, serial# 8618279 tveeprom 1-0050: tuner model is Philips FM1216ME MK5 (idx 117, type 4) tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 1-0050: audio processor is MSP4418 (idx 25) tveeprom 1-0050: decoder processor is SAA7115 (idx 19) tveeprom 1-0050: has radio, has IR remote ivtv0: Autodetected Hauppauge WinTV PVR-350 ivtv0: tveeprom cannot autodetect tuner!<6>tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) msp3400 1-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0) msp3400 1-0040: MSP4418G-B3 supports nicam and radio, mode is autodetect and autoselect ivtv0: Registered device video0 for encoder MPEG (4 MB) ivtv0: Registered device video32 for encoder YUV (2 MB) ivtv0: Registered device vbi0 for encoder VBI (1 MB) ivtv0: Registered device video24 for encoder PCM audio (1 MB) ivtv0: Registered device radio0 for encoder radio ivtv0: Registered device video16 for decoder MPEG (1 MB) ivtv0: Registered device vbi8 for decoder VBI (1 MB) ivtv0: Registered device vbi16 for decoder VOUT ivtv0: Registered device video48 for decoder YUV (1 MB) ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) tuner 1-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 ivtv: ==================== END INIT IVTV ==================== fembar:/home/steph# v4l2-ctl --all Driver info: Driver name : ivtv Card type : Hauppauge WinTV PVR-350 Bus info : 0000:00:05.0 Driver version: 2566 Capabilities : 0x010700F3 Video Capture Video Output VBI Capture VBI Output Sliced VBI Capture Sliced VBI Output Tuner Audio Radio Read/Write Format: Type : Video Capture Width/Height : 384/288 Pixel Format : MPEG Field : Interlaced Bytes per Line: 0 Size Image : 131072 Colorspace : Broadcast NTSC/PAL (SMPTE170M/ITU601) Format: Type : Video Output Width/Height : 384/288 Pixel Format : MPEG Field : Interlaced Bytes per Line: 0 Size Image : 131072 Colorspace : Broadcast NTSC/PAL (SMPTE170M/ITU601) Format: Type : Sliced VBI Capture Service Set : Service Line 0: / Service Line 1: / Service Line 2: / Service Line 3: / Service Line 4: / Service Line 5: / Service Line 6: / Service Line 7: / Service Line 8: / Service Line 9: / Service Line 10: / Service Line 11: / Service Line 12: / Service Line 13: / Service Line 14: / Service Line 15: / Service Line 16: / Service Line 17: / Service Line 18: / Service Line 19: / Service Line 20: / Service Line 21: / Service Line 22: / Service Line 23: / I/O Size : 0 Format: Type : Sliced VBI Output Service Set : vps wss Service Line 0: / Service Line 1: / Service Line 2: / Service Line 3: / Service Line 4: / Service Line 5: / Service Line 6: / Service Line 7: / Service Line 8: / Service Line 9: / Service Line 10: / Service Line 11: / Service Line 12: / Service Line 13: / Service Line 14: / Service Line 15: / Service Line 16: vps / Service Line 17: / Service Line 18: / Service Line 19: / Service Line 20: / Service Line 21: / Service Line 22: / Service Line 23: wss / I/O Size : 2304 Format: Type : VBI Capture Sampling Rate : 27000000 Hz Offset : 248 samples (9.18519e-06 secs after leading edge) Samples per Line: 1439 Sample Format : GREY Start 1st Field : 6 Count 1st Field : 18 Start 2nd Field : 318 Count 2nd Field : 18 Video input : 0 (Tuner 1) Video output: 0 (S-Video + Composite) Audio input : 0 (Tuner 1) Audio output: 0 (A/V Audio Out) Frequency: -1 (268435455.937500 MHz) Video standard = 0x0000000f PAL-B/B1/G/H Tuner: Capabilities : 62.5 kHz multi-standard stereo lang1 lang2 Frequency range : 44.0 MHz - 958.0 MHz Signal strength : 0% Current audio mode : stereo Available subchannels: mono Thank for you help No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.503 / Virus Database: 269.16.7/1152 - Release Date: 26/11/2007 10:50 _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
