On Dec 24, 2007 3:33 AM, Scott Reynolds <[EMAIL PROTECTED]> wrote: > On Dec 22, 2007, at 10:18 PM, Fred Firestine wrote: > > > Still hoping for a sample ivtv module file... > > I have a PVR-350 and a PVR-150 in my system (in the opposite order you > originally had yours installed). Unfortunately, I don't have any > wisdom to impart here; I am using the stock KnoppMyth module > configuration, and it has always worked properly for me. > > Since installing KM R5F27 I have updated to the v4l-dvb trunk (with a > small patch that you can find in the ivtv-users list archive). I did > this solely to address some problems with VBI data, not video > problems, though. I don't know whether this would fix your issue or not. > > > --scott > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users >
Thanks Scott! Turns out I found some helpful info on this page: http://ivtvdriver.org/index.php/Troubleshooting#If_you_have_ghosting This card uses a video source with a set-top box, so I added the following to my channel change script: v4l2-ctl --set-ctrl temporal_filter=0 That didn't fix the problem by itself, so I also changed the capture resolution to 720x480. Now my recordings using the PVR-150 look just as nice as the PVR-350. I still consider my move to KnoppMyth a great success, since I am using mostly default settings. In the big picture this has saved me a lot of configuration. Fred _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
