Dear all, This is my first time on a mailing list (I always use forums) [this is my 2nd try to post a message, first one got bounced]
But I have a problem i just cant figure out. I'm trying to get my PVR-150 card working on a ClarkConnect distro. So far so good, i can tune and switch inputs and record video on my video0 device. But, I want to use my card as a security camera, and Zoneminder only supports raw video. So I wanted to use the /dev/video32 but it says " /dev/video32: No such file or directory" when i want to make a test recording of the input The video0 is working fine, but it is the only one who is present. Does any body know how i can fix this? ivtv output is: ivtv0: Removed Hauppauge WinTV PVR-150, card #0 Linux video capture interface: v2.00 ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.10.6 (tagged release) loading ivtv: Linux version: 2.6.18-8.1.14.3.cccustom SMP mod_unload 686 REGPARM 4KSTACKS gcc-3.4 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23416 based) PCI: Enabling device 0000:02:04.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 18 (level, low) -> IRQ 169 ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: Encoder revision: 0x02060039 tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) cx25840 1-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0) cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) tveeprom 1-0050: Hauppauge model 26034, rev C197, serial# 7933473 tveeprom 1-0050: tuner model is TCL 2002MB_3H (idx 97, type 55) tveeprom 1-0050: TV standards PAL(B/G) PAL(D/D1/K) (eeprom 0x44) tveeprom 1-0050: audio processor is CX25842 (idx 36) tveeprom 1-0050: decoder processor is CX25842 (idx 29) tveeprom 1-0050: has no radio, has IR remote ivtv0: Autodetected Hauppauge WinTV PVR-150 ivtv0: reopen i2c bus for IR-blaster support tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) cx25840 1-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0) cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: Registered device video0 for encoder MPEG (4 MB) ivtv0: Registered device video32 for encoder YUV (2 MB) ivtv0: Registered device vbi0 for encoder VBI (1 MB) ivtv0: Registered device video24 for encoder PCM audio (1 MB) tuner 1-0061: type set to 55 (TCL 2002MB) ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ==================== END INIT IVTV ==================== [EMAIL PROTECTED] motion-3.2.4]# ls -l /dev/video* crw----rw- 1 root root 81, 0 May 12 2006 /dev/video0 crw------- 1 root root 81, 1 May 12 2006 /dev/video1 crw------- 1 root root 81, 2 May 12 2006 /dev/video2 crw------- 1 root root 81, 3 May 12 2006 /dev/video3 /dev/video: total 0 crw------- 1 root root 10, 204 May 12 2006 em8300 crw------- 1 root root 10, 206 May 12 2006 em8300_ma crw------- 1 root root 10, 205 May 12 2006 em8300_mv crw------- 1 root root 10, 207 May 12 2006 em8300_sp /dev/video1394: total 0 crw------- 1 root root 171, 16 May 12 2006 0 crw------- 1 root root 171, 17 May 12 2006 1 crw------- 1 root root 171, 18 May 12 2006 2 crw------- 1 root root 171, 19 May 12 2006 3 thank you in the advance. Fabje _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
