Hi ,
Thanks for your reply .
My Kernel Version is : 2.6.16.21-0.8-smp
Dmesg of my system I have attached it along with this mail . Please have a
look at it.
Thanks & Regards
kuldip
On 1/9/08, Hans Weber <[EMAIL PROTECTED]> wrote:
> Hi ;-)
>
>
>
>
>
> Could yo may install a more recent version of kernel ?
>
> Could you send a dmesg of your system ?
>
> Greeting
>
> Hans
>
>
> ------------------------------
>
> *Von:* kuldip mitra [mailto:[EMAIL PROTECTED]
> *Gesendet:* Mittwoch, 9. Januar 2008 14:12
> *An:* [email protected]
> *Betreff:* [ivtv-users] Reg: Problem in getting multiple inputs in a
> single system
>
>
>
> Hi,
> I have Hauppage Win TV PVR 150 . As per my requirement I have put 3
> of PVR 150 cards in a single system.
> My System Configuraton is :
>
> O/S : SuSE Linux 10.0
>
> Video card : Hauppage Win TV PVR 150.
>
> IVTV Driver : ivtv-0.4.10
>
> My modules.conf configuration file looks like this:
>
> alias char-major-81 videodev
> alias char-major-81-0 ivtv
> alias char-major-81-1 ivtv
> alias char-major-81-2 ivtv
>
> After configuring the file I did this :
>
> # *ivtvctl -u 0xff
> # ivtvctl -p 1
> # ivtvctl -f width=720,height=576
> # cat /dev/video0 > first_capture.mpg
>
> It is working fine for the video0. But I am not able to configure for the
> other two Hauppage cards . I am not able to capture video clips from the
> other two cards. So Please can anyone help me in this regard. I would be
> grateful if Someone helps me in this , as its my urgent need.
>
> Thanks & Regards
>
> kuldip*
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>
Linux version 2.6.13-15-smp ([EMAIL PROTECTED]) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 SMP Tue Sep 13 14:56:15 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007dfd0000 (usable)
BIOS-e820: 000000007dfd0000 - 000000007dfde000 (ACPI data)
BIOS-e820: 000000007dfde000 - 000000007e000000 (ACPI NVS)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
1119MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
On node 0 totalpages: 516048
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 286672 pages, LIFO batch:31
DMI present.
Using APIC driver default
ACPI: RSDP (v000 ACPIAM ) @ 0x000f8e30
ACPI: RSDT (v001 A M I OEMRSDT 0x04000725 MSFT 0x00000097) @ 0x7dfd0000
ACPI: FADT (v002 A M I OEMFACP 0x04000725 MSFT 0x00000097) @ 0x7dfd0200
ACPI: MADT (v001 A M I OEMAPIC 0x04000725 MSFT 0x00000097) @ 0x7dfd0390
ACPI: MCFG (v001 A M I OEMMCFG 0x04000725 MSFT 0x00000097) @ 0x7dfd0400
ACPI: OEMB (v001 A M I AMI_OEM 0x04000725 MSFT 0x00000097) @ 0x7dfde040
ACPI: DSDT (v001 1AAAA 1AAAA000 0x00000000 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 7e000000 (gap: 7e000000:80e00000)
Built 1 zonelists
Kernel command line: root=/dev/sda2 vga=0x317 selinux=0 resume=/dev/sda1 splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2993.029 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2039332k/2064192k available (2330k kernel code, 23608k reserved, 750k data, 252k init, 1146688k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5992.88 BogoMIPS (lpj=11985779)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e59d 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000e59d 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 20000000 00000000 00000080 0000e59d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
mtrr: v2.0 (20020519)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 1769k freed
ACPI: Looking for DSDT in initrd... not found!
not found!
CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 05
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 8797.48 BogoMIPS (lpj=17594966)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e59d 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000e59d 00000000 00000001
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 20000000 00000000 00000080 0000e59d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 05
Total of 2 processors activated (14790.37 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=1
PCI: Using MMCONFIG
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
Boot video device is 0000:00:02.0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to [EMAIL PROTECTED] cc [EMAIL PROTECTED])
pnp: 00:08: ioport range 0xa00-0xa0f has been reserved
pnp: 00:08: ioport range 0xa10-0xa1f has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1e.0
IO window: c000-cfff
MEM window: b7c00000-b7cfffff
PREFETCH window: b7f00000-cfefffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
audit(1199868327.232:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 6144k, total 32448k
vesafb: mode is 1024x768x16, linelength=2048, pages=20
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76011 bytes,<6>...found (1024x768, 12703 bytes, v3).
Console: switching to colour frame buffer device 127x44
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
mice: PS/2 mouse device common for all mice
input: PC Speaker
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.38
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Starting balanced_irq
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard on isa0060/serio0
ACPI wakeup devices:
EUSB MC97 P0P4 P0P5 P0P6 P0P7 P0P8 P0P9 USB0 USB1 USB2 USB3 P0P2 P0P1
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 252k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI subsystem initialized
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169
ICH7: chipset revision 1
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: HL-DT-ST DVDRAM_GSA-H40N, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
libata version 1.12 loaded.
ata_piix version 1.04
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xE080 ctl 0xE002 bmdma 0xD800 irq 177
ata2: SATA max UDMA/133 cmd 0xDC00 ctl 0xD882 bmdma 0xD808 irq 177
ata1: dev 0 cfg 49:2f00 82:346b 83:7fe9 84:4773 85:3469 86:bc01 87:4763 88:207f
ata1: dev 0 ATA, max UDMA/133, 321672960 sectors: lba48
ata1: dev 0 configured for UDMA/133
scsi0 : ata_piix
ATA: abnormal status 0x7F on port 0xDC07
ata2: disabling port
scsi1 : ata_piix
Vendor: ATA Model: Hitachi HDS72161 Rev: P22O
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
ACPI: CPU0 (power states: C1[C1])
ACPI: CPU1 (power states: C1[C1])
ACPI-0733: *** Warning: Processor Device is not present
ACPI-0521: *** Warning: Error getting cpuindex for acpiid 0x3
ACPI-0733: *** Warning: Processor Device is not present
ACPI-0521: *** Warning: Error getting cpuindex for acpiid 0x4
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Attempting manual resume
swsusp: Suspend partition has wrong signature?
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Adding 1052216k swap on /dev/sda1. Priority:-1 extents:1
bootsplash: status on console 0 changed to on
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [EMAIL PROTECTED]
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
bootsplash: status on console 0 changed to on
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 185, io base 0x0000e880
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 177, io base 0x0000e800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 169, io base 0x0000e480
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 193, io base 0x0000e400
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hw_random hardware driver 1.0.0 loaded
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 945G Chipset.
agpgart: Detected 32508K stolen memory.
agpgart: AGP aperture is 256M @ 0xe0000000
usb 2-1: new low speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1b.0 to 64
r8169: module not supported by Novell, setting U taint flag.
usb 4-1: new full speed USB device using uhci_hcd and address 2
Linux video capture interface: v1.00
ivtv: module not supported by Novell, setting U taint flag.
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.4.10 (tagged release) loading
ivtv: Linux version: 2.6.13-15-smp SMP 586 REGPARM gcc-4.0
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
hda: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: irq 185, io mem 0xb7e3bc00
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
r8169 Gigabit Ethernet driver 6.001.00 loaded
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 20 (level, low) -> IRQ 201
eth0: RTL8169SC/8110SC at 0xf8822c00, 00:19:db:8c:a5:e6, IRQ 201
ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193
tveeprom: module not supported by Novell, setting U taint flag.
tveeprom: ivtv version
tveeprom: Hauppauge: model = 26559, rev = B260, serial# = 8740732
tveeprom: tuner = LG S001D MK3 (idx = 60, type = 38)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
tveeprom: audio processor = CX25843 (type = 25)
tveeprom: decoder processor = CX25843 (type = 1e)
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
Initializing USB Mass Storage driver...
usb 5-7: new high speed USB device using ehci_hcd and address 3
r8169: eth0: link down
usbcore: registered new driver hiddev
tuner: module not supported by Novell, setting U taint flag.
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb 2-1: USB disconnect, address 2
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
usb 2-1: new low speed USB device using uhci_hcd and address 3
cx25840: module not supported by Novell, setting U taint flag.
cx25840 1-0044: ivtv driver
cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
usb 4-1: USB disconnect, address 2
bootsplash: status on console 0 changed to on
r8169: eth0: link up
cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03ba0a0(lo)
IPv6 over IPv4 tunneling driver
wm8775: module not supported by Novell, setting U taint flag.
wm8775 1-001b: ivtv driver
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
IA-32 Microcode Update Driver: v1.14 <[EMAIL PROTECTED]>
microcode: No new microcode data for CPU0
microcode: No new microcode data for CPU1
IA-32 Microcode Update Driver v1.14 unregistered
tda9887: module not supported by Novell, setting U taint flag.
tda9887 1-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
Vendor: JetFlash Model: TS1GJFV30 Rev: 0.00
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdb: 2015232 512-byte hdwr sectors (1032 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
SCSI device sdb: 2015232 512-byte hdwr sectors (1032 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb: sdb1
Attached scsi removable disk sdb at scsi3, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi3, channel 0, id 0, lun 0, type 0
usb-storage: device scan complete
mtrr: 0xe0000000,0x10000000 overlaps existing 0xe0000000,0x1000000
ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv0: Create encoder radio stream
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0
ivtv0: Initialized WinTV PVR 150, card #0
ivtv: ====================== NEXT CARD ======================
ivtv1: Autodetected WinTV PVR 150 card (cx23416 based)
ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 17 (level, low) -> IRQ 209
tveeprom: ivtv version
tveeprom: Hauppauge: model = 26559, rev = B260, serial# = 8740889
tveeprom: tuner = LG S001D MK3 (idx = 60, type = 38)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
tveeprom: audio processor = CX25843 (type = 25)
tveeprom: decoder processor = CX25843 (type = 1e)
ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50]
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61]
cx25840 2-0044: ivtv driver
cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
ivtv1: i2c attach to card #1 ok [client=cx25840, addr=44]
wm8775 2-001b: ivtv driver
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1)
ivtv1: i2c attach to card #1 ok [client=wm8775, addr=1b]
tda9887 2-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #1)
ivtv1: i2c attach to card #1 ok [client=tda9887, addr=43]
bootsplash: status on console 0 changed to on
ivtv1: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv1: Encoder revision: 0x02060039
ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv1: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv1: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv1: Create encoder radio stream
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #1
ivtv1: Initialized WinTV PVR 150, card #1
ivtv: ====================== NEXT CARD ======================
ivtv2: Autodetected WinTV PVR 150 card (cx23416 based)
ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 18 (level, low) -> IRQ 169
tveeprom: ivtv version
tveeprom: Hauppauge: model = 26559, rev = G189, serial# = 9511888
tveeprom: tuner = TCL MFPE05 2 (idx = 89, type = 38)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
tveeprom: audio processor = CX25843 (type = 25)
tveeprom: decoder processor = CX25843 (type = 1e)
ivtv2: i2c attach to card #2 ok [client=tveeprom, addr=50]
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #2
ivtv2: i2c attach to card #2 ok [client=(tuner unset), addr=61]
cx25840 3-0044: ivtv driver
cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #2)
eth0: no IPv6 routers present
cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
ivtv2: i2c attach to card #2 ok [client=cx25840, addr=44]
wm8775 3-001b: ivtv driver
wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #2)
ivtv2: i2c attach to card #2 ok [client=wm8775, addr=1b]
tda9887 3-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #2)
ivtv2: i2c attach to card #2 ok [client=tda9887, addr=43]
subfs 0.9
ivtv2: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv2: Encoder revision: 0x02060039
ivtv2: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv2: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv2: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
ivtv2: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv2: Create encoder radio stream
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #2
ivtv2: Initialized WinTV PVR 150, card #2
ivtv: ==================== END INIT IVTV ====================
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
subfs: unsuccessful attempt to mount media (256)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
usb 5-7: USB disconnect, address 3
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
