On ma, 2008-01-21 at 22:11 +0100, Peter Vollebregt wrote: > Former posting containing all the information: > > Very often i have no sound when using my PVR-150 tv-card, sometimes i > do. The root casus seems to be the way the cx25840 module recognizes the > cards possibilities. Normally it is wrong, but i can correct it by > modprobing the module again (and sometimes being lucky - there is no > method in this): > > My question is how to solve this so the card is recognized properly. > > Information about the error (what i can diagnose): > > When i run: "v4l2-dbg --log-status | grep cx25840" and sound works i get: > cx25840 2-0044: Video signal: present > cx25840 2-0044: Detected format: PAL-BDGHI > cx25840 2-0044: Specified standard: automatic detection > cx25840 2-0044: Specified video input: Composite 7 > cx25840 2-0044: Specified audioclock freq: 48000 Hz > cx25840 2-0044: Detected audio mode: stereo > cx25840 2-0044: Detected audio standard: A2-BG > cx25840 2-0044: Audio muted: no > cx25840 2-0044: Audio microcontroller: running > cx25840 2-0044: Configured audio standard: automatic detection > cx25840 2-0044: Configured audio system: automatic standard and > mode detection > cx25840 2-0044: Specified audio input: Tuner (In8) > cx25840 2-0044: Preferred audio mode: stereo > cx25840 2-0044: Selected 65 MHz format: autodetect > cx25840 2-0044: Selected 45 MHz format: chroma > > When it does *not* work i get (differences marked with ->): > cx25840 2-0044: Video signal: present > cx25840 2-0044: Detected format: PAL-BDGHI > ->cx25840 2-0044: Specified standard: PAL-N
Why did you set this to PAL-N? The correct value for the Netherlands is correctly detected, PAL-BDGHI. > cx25840 2-0044: Specified video input: Composite 7 > cx25840 2-0044: Specified audioclock freq: 48000 Hz > ->cx25840 2-0044: Detected audio mode: mono > ->cx25840 2-0044: Detected audio standard: no detected audio standard > ->cx25840 2-0044: Audio muted: yes > cx25840 2-0044: Audio microcontroller: running > cx25840 2-0044: Configured audio standard: automatic detection > ->cx25840 2-0044: Configured audio system: BTSC > cx25840 2-0044: Specified audio input: Tuner (In8) > cx25840 2-0044: Preferred audio mode: stereo > Living in the Netherlands, so PAL-N should be the proper standard. PAL-N is used in South America, we really use PAL-B/G ;-) Greets Sander _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
