On Friday 07 March 2008 00:02:42 Sander Sweers wrote:
> Hello All,
>
> There is a special page on the wiki [1] for the Adaptec AVC-2410/2010
> which to me looks outdated and can be removed (or parts moved into
> the main howto). But before this is done can someone please confirm
> these cards works out of the box with the current ivtv releases (0.10
> and in kernel) with the firmware from [2]?
It will work with the firmware from [2]. There is absolutely no need to
extract it yourself. However, the tuner ignore=0,0x6b option is still
needed unless you use 1) 2.6.25-rcX or 2) 2.6.22 or up and the bleeding
edge drivers. This module option works around i2c-core limitations that
were only fixed in 2.6.22 and ivtv support for those fixes did not
arrive until 2.6.25 (it was very complicated and a lot of work).
Also the reference to the Japanese tuner should stay I think (I wasn't
aware of this and will try to add support for it in ivtv).
You also need to specify whether you use pal (module option pal=b for
example) since there is no other way to specify whether you have a PAL
version or not.
As an aside: I need to improve on these pal/ntsc/secam module options,
they are not quite flexible enough.
>
> And if not which steps are needed to make it work?
That should be it.
Thanks,
Hans
>
> Many thanks
> Sander
>
> [1] http://ivtvdriver.org/index.php/Adaptec_AVC-2410
> [2] http://dl.ivtvdriver.org/ivtv/firmware/firmware.tar.gz
>
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
