Hi Having an issue with getting a card to work in my machine would appreciate any help that you could give.
Tried using the RPM's from opensuse.org and yast no luck, caused firmware issues as listed in the wiki (http://ivtvdriver.org/index.php/Troubleshooting#Use_the_right_firmware). So built the packages from source and downloaded the firmware direct. SuSE 10.3 kernel 2.6.22.16-0.1 with latest v4l kernel compiled in ivtv 1.0.3 latest firmware built from source (tried RPM Firmware problems) One dvb usb tuner terratec cinergy hybrid XS (s-video/composite/audio in/ird in) analog / DVB tv previously installed and working. one Haupage win-pvr250 ( s-video/composite/audio/ird in ) analog tv from boot.msg 6>ivtv: ==================== START INIT IVTV ==================== <6>ivtv: version 1.0.0 (2.6.22.17-0.1-default SMP mod_unload ) loading <6>ivtv0: Autodetected Hauppauge card (cx23416 based) <6>ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 21 (level, low) -> IRQ 21 <6>ivtv0: Unreasonably low latency timer, setting to 64 (was 32) lspci 06:01.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) lsmod | grep ivtv ivtv 147504 1 firmware_class 27520 3 microcode,xc3028_tuner,ivtv i2c_algo_bit 23172 1 ivtv cx2341x 28676 1 ivtv videodev 44672 2 ivtv,em28xx v4l2_common 36352 7 tvp5150,ivtv,cx2341x,tuner,em28xx,compat_ioctl32,videodev v4l1_compat 28548 3 ivtv,em28xx,videodev tveeprom 34448 2 ivtv,em28xx i2c_core 43648 13 ir_kbd_i2c,qt1010,mt2060,mt352,zl10353,xc3028_tuner,tvp5150,ivtv,i2c_algo_bit,tuner,em28xx,i2c_i801,tveeprom Created a udev rule - /etc/udev/rules.d/81-ivtv.rules # Test file to create a /dev entry for winpvr-250 card # DRIVERS=="ivtv", ATTR{name}=="ivtv? encoder MPEG", KERNELS=="0000:06:01.0", SYML INK+="pvr_250_1" # DRIVERS=="ivtv", ATTR{name}=="ivtv? encoder PCM audio", KERNELS=="0000:06:01.0", SYMLINK+="pvr_250_1_audio" # #End of file heres hoping !!! listing from modprobe.conf alias char-major-81 videodev install char-major-81-0 /bin/true install char-major-81-1 /bin/true install char-major-81-2 /bin/true install char-major-81-3 /bin/true /etc/modprobe.d/tv (this file is definatley screwed combination of me + yast !!!!) alias char-major-81 videodev options i2c-algo-bit bit_test=1 # YaST configured TV card # : alias char-major-81-0 ivtv # YaST configured TV card # _axC.07SnnepFJ51:WinTV PVR 250 alias char-major-81-1 ivtv alias char-major-81-2 off alias char-major-81-3 off It now appears that the card is registering correctly and I don't see errors in the boot log. But no way to reference the card no /dev files plus I am guessing that the /dev/video & /dev/video0 may be conflicting same as when i try to use analog tv I think the request trys to go to the pvr-250 but I see a message from the cinergy saying 'not for us' If i run a modprobe ivtv it never returns a prompt. I hope that I have done most of the hard work by following the readme/wiki/troubleshooting guides just can't figure out the last bit Any chance of a little help or inspiration please ..... _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
